CV Production operator, Working Experience at both Onshore & Offshore

Resume built for oil and gas job opportunities by a jobseeker with experience in Production operator, Working Experience at both Onshore & Offshore - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 86897

Dear Sir,
good day to you, i am herewith
sending my RESUME for your reference.
Please give a chance to prove myself.
I am a mechanical engineer from India with 10 years of
experience in Oil and Gas, as a production operator
For further contacts , mail me or call to my mobile number.

Working Experience at both Onshore & Offshore

1. Oct 2005 To Till Date
 Worked as a PRODUCTION OPERATOR (commissioning) for TOTAL ABK Through S.O.S (Off –shore) ABU- DHABI
 Working as a OPERATION FOREMAN for ADCO Through S.O.S (On –shore)ABU- DHABI

2. Nov 2004 To Oct 2005
Worked as a PRODUCTION OPERATOR for P.D.O. (SHELL) in Nimar through ORYX OIL & GAS SERVICE (On-shore) Oman

3. Dec 2000 To Nov 2004:
Worked as a PRODUCTION OPERATOR for ONGC in Mumbai High Off-shore (All Platforms) through S.S. Construction, Mumbai

4. Jul 1998 To Dec 2000:
Worked as a PRODUCTION OPERATOR for Oil India Ltd. in TANOT at Rajasthan (Onshore) through O.F.S, Mumbai.


ADCO, AL-DABBIYA
Since FEB 2006 working with ADCO (Abu Dhabi company for onshore oil operations) at Al-Dabbiya as commissioning foreman in their newly built oil and gas plant. Plant comprises oil well head and cluster operation, crude three phase separation (oil, gas and water) in two stages, desalting, stabilization column, vapour recovery compressors, low pressure, medium pressure and High pressure gas injection compressors, gas dehydration and glycol regeneration system.

Heaters operations
Worked in Natural Draught, Gas fired heater (Duty 12.1 MW), with Dowtherm- Q heat transfer fluid circulating to all consumer (Glycol Regeneration and oil stabilization) in a closed loop. Capable of start up, normal and emergency shut down of heater, Adjusting registers and dampers for economic/Efficient operation of heaters. Operation with snuffing nitrogen, Fluid Loading package and Trouble shooting. Familiar with burner management System operations.
Utility plant operations
Familiar with Utility section including closed drain, Instrument air Compression package with 4 Screw compressors (A.C), Desiccant Drier, Regeneration package. Utility Nitrogen Generation Package (Membrane technology).Fresh water system and Produced water system, Produced water degassers, Chemical injection package. Fire water system, Fire water network, Automatic deluge Valves operation, Fusible loops operation, Fire fighting foam system operation, export pumps, and Water Injection Pumps (Sulzur with ABB motors), HP flare and Tank flare system with KOD s and Vapor recovery system (zero flaring concept).

CHEMICAL INJECTION SYSTEM:
Handled following Crude Oil injection & Treatment Chemicals such as pour point Depress and, Demulsifier, Gas phase corrosion inhibitor, Liquid phase Corrosion inhibitor and water injection chemicals such as Biocide, Oxygen Scavenger, Corrosion inhibitors, Anti Scale inhibitor, Gas treatment chemical like Glycol.

COMPRESSOR UNIT :
Piston type compressor, screw type compressor, and multistage compressor, startup and shutdown lube oil pump operation, lube oil maintenance cooling system , lube oil filter, regulator control pressure switch operation etc.

M/S.Abudhabi Company for onshore oil operations( ADCO). Operation Foreman.

• Involved in the commissioning of Central Processing Facilities plant NEB Field.
• Experience in the plant operation with DCS designed by Honey well-Experion, Allan Bradley ESD PLC, Bentley Nevada Machine Monitoring System.
• Experience in Tank Farm (Crude Oil Storage & Pumping), utility offsite areas.
• Experience in Well Head, Well head Control panel, Test separators with HIPPS system.
• Manage the operation of production facilities in compliance with Company Standards and Procedures. Apply relevant HSEMS elements to meet HSE objectives.
• Experience in the usage of PFD, P & ID, Equipment Process Datasheets and international codes and standards like API, NFPA.
• Experience in the discussions of HAZID, and HAZCHEM.
• Experience in start-up, shutdown, Normal operation, Emergency operation and commissioning procedures.
• Troubleshoot and Rectify bottlenecks during plant abnormal conditions.
• Maintain records to demonstrate compliance with company policies, procedures and standing instructions.
• Coordinate with maintenance and other support services to ensure safety, integrity and reliability of the plant facilities as per targets.
• Ensure availability of utilities to support process units, timely availability of on-specification products.
• Direct and lead shift personnel to achieve applicable KPI’s.
• Monitor, check, analyze the status and performance of operational equipment and take corrective action if necessary.
• Provide routine reports on plant production and environmental performance, and other issues. Initiate reports on equipment failures, near misses, incidents and accidents and contribute to operational improvements. Develops material and equipment specs, for enhancing or replacing existing plants or to procure new items.
• Prepares reports and keeps records on operations activities, orders, etc.
• Hands-On theoretic and practical experience in the Process Operation and Design of upstream Oil and Gas surface installations.
• Experience in Metering stations, Gas chromatographs and Moisture analyzers, Hydro carbon analyzers. Assists in monitoring corrosion related activities and remedial work.
• Reporting to Team Leader – Operations.

WATER INJECTION & TREATMET PLANT:

ELECTRICAL SUBMERSIBLE PUMP :
Worked in water injection plants involving water supply wells with submersible pumps water injection, disposal wells. . Pressure adjustment according to the operation necessity, Trouble shooting, Reporting operation abnormalities of the water injection system, Daily report preparation

GAS DEHYDRATION UNIT :
Glycol contactor – Glycol recovery scrubber – Reboiler, Burner reflux coil – Glycol flash drum – Glycol and charcoal filter – lean, rich Glycol exchange – Glycol storage tank – three way valve – Glycol and circulation pump operation – Glycol pumped in the system and also the pH valve checking at Glycol – Fuel gas, Pilot gas, blanket Glycol purification – Glycol Regeneration – Natural Gas dehydration – coalescer separator – Gas and stripping gas operation

WELL HEAD AND WELL TESTING OPERATIONS:
Well head operations, well testing and taking samples, well racking, well optimisation, BS&water percent calculations, oil and gas ratio calculation. SDV, SSSV opening operations, well head panel board operations. Flow line check up for leaks and flow line flushing jobs., permanent and Hydraulic packer leakage test, expander seal assembly leakage test, valve flushing, greasing and inflow testing, fitting G.L.V. inside the mandrel and leakage test, SSSV body leakage test and flapper valve operation test, well head test and activate well. Well Test choke manifold operation, Test separator - PCV, LCV operation, orifice plate changing, X-mas tree operation, well opening and closing operation .two phase and three phase separators handling. Unman shutdown and restart operation. Knowledge of pilot safety system. Handling high pressure gas well. Artificial gas well optimum changing.

OIL & GAS GATHERING STATIONS:
Operation & Control of wells through different headers for optimum production. Oil Manifolds, gas lift manifolds, Surge tanks, Separators (Two/ Three Phase), Water disposal pumps, Crude transfer pumps, chemical injection, Gas /Oil line pigging operation,. Gas compressors, Inter-stage scrubbers, Gas treatment, Isolation & de- isolation of equipments, vessels & tanks for maintenance. Familiar with work permit systems, gas testing, mechanical and elect. Isolation producers and co-ordination with maintenance crew, trouble- shooting, reporting etc
.
CONTROL PANEL OPERATIONS:
Conversant in handling of all types of Control Panels, Central Control Panels, Local Control Panels, Pneumatic Control Panels, Valve Mounted Control Panels and DCS Systems. Various types of valves PCV, LCV, FCV, TCV, Fisher Controller, Gas detectors, U.V. Detectors, Honey well Instrument panels etc.


ARTIFICIAL LIFT SYSTEMS:
Operation of High Pressure Gas Injection system. High-pressure Gas Injection Wells. Operation of Artificial Gas Lift Wells (Intermittent & Continuous lift). Operation of Gas Lift Compressors, Casing Depressurizing, Water Lift Manifolds, Water Lift Pumps, etc.

PRESSURE BUILD-UP SURVEY

Drilling fluid level monitoring by acoustic gas gun in Underbalanced Drilling Wells & gas injection while tripping and running-in. Also monitor the Oil depth in the running pump-jack wells in a regular basis.
Acoustic Pressure Buildup Survey in flowing wells to determine Bottom hole pressure, Reservoir pressure, Skin/Well bore damage, Draw Down, Geology channel/fracture fault, Permeability etc. by using FL1 Monitor to acquire data and interpretation by FL1 Buildup Analysis Tool & JAWS software.
Monitor the position of the fluid contacts like GOC for observation wells by using Acoustic equipments.

PIGGING OPERATION:
Successfully carried out pig launching and receiving operation on Oil & Gas flow lines from Well- Head & Oil & Gas export lines. Fully involved in Bactericide & Corrosion inhibitor, chemical dosing prior to, in between and after launching the pig..
Pre-Commissioning and Commissioning Activities:
During the Commissioning time, I have had been involved in the following activities of Hydro Testing, Flushing, Purging, Line Tracing, Punch List Preparing and Clearing the Problems of all with the co-ordination of Piping, Mechanical, Instrumentation and Electrical Team members. And also involving Plant Start-Up and Shut Down activities of all as a Team Member. Finally, Normalize the Plant step by step by the way of standard procedures. In addition, Controlling and monitoring the plant normal operations according to the instructions.

Special Training Courses
• Fire Fighting
• Survival at Sea
• Elementary First Aid
• Personal Safety and Social Responsibilities.
• HSE Induction Course
• H2S Awareness & Escape
• Job Hazard Analysis
• PTW
• ESSW
• Basic Life Support
• Self Contained Breathing Apparatus
• Gas testing
• Coxswain

Windows, CAD CAM Pro E-2000i &
Microsoft Office

Field Expertise Areas
• Off Shore Production
• Dehydration Unit (Glycol)
• Stabilisation Column
• DCS Operation’s
• Oil & Gas Gathering Station
• Well head & Process Platforms
• Gas Compressor Unit
• Boiler & Heater Treater
• Waste Water Treatment Plant
• Fire Water Pump House
• Utility Unit