CV CAD draftsman seeking entry level offshore job

Resume built for oil and gas job opportunities by a jobseeker with experience in CAD draftsman seeking entry level offshore job - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 87470
Last Updated: Saturday, December 20, 2008

I understand that there are vacancies in your organisation for the above mentioned post. I wish apply for the same.
As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I wish to work in oil and gas construction /PIPING offshore /onshore project in your concern .any job in your engineering group as junior level I will improve skills in oil and gas project offshore /onshore. I wish to step step improve skills in laying of offshore platform and piping and QA/QC . so kindly give a chance to work in your group project Gas Project
Ican work in multidisiple skills in plumbing ,hvac,sanitary,archi,interior,piping and etc
I wish to work permanent in your concern. I need sponser work permit
I herewith enclose my resume for your kind consideration.
I am looking forward for a favourable reply from your goodself soonest possible. Your consideration and co-operation towards this application is greatly appreciated.

WORK EXPERIENCE
IGF Engineering Pvt. Ltd ,Trichy ,India 03-08-2007 to 31-01-2008 Senior Draftsman
(USA multinational BPO engineering company India )
Projects:
 Hotel project (west indies island ) –New build, 4 storey , Villa project ,USA residential project

Responsiblities:
 Preparation of full construction drawings plan ,elevation , section, plumbing,sanitary,hvac,electrical
 Detailed drawings
 Update all drawing as per client standard and required scale
 Used Autocad R2008
Reason for leaving : I wish to work in abroad oil and gas offshore project
A & N Constructions 12-12-2005 to 31-07-2007 Senior Cad Technician
(Civil engg.&contractor-10 staff)
Projects:

 Residential (pondy cherry) –New build, 2 storey 235 Sq.m Residential building with store,living,3 bed room,living,kitchen cum dining .

 Residential (pond cherry )–New build, 2 storey 260 Sq.m Residential building with store,living,2 bed room,living,kitchen cum dining .
 Responsiblities:
 Preparation of full construction drawings
 Detailed drawings
 Site supervision
 Used Autocad R2004
Reason for leaving : Project finished, and mostly I was done India project so I move to work in USA standard – multinational company project
Velan Constructions 13-11-2004 to 16-11-2005 Cad draughtsman
(civil engg.&contractor-4 staff)
Projects:
 Residential (Manjkuppam) –New build, single storey 1400 sq.ft Residential building with store,living,2 bed room,living,kitchen cum dining .
 Residential (Manjakuppam)–New build, 2 storey 2700 Sq.ft Residential building with store,living,3 bed room,living,kitchen cum dining .
Responsiblities:
 Preparation of full construction drawings
 Detailed drawings
 Used Autocad R2000
Reason for leaving : Project finished, move to a&n construction do some new project
R.T. Constructions 23-05-2003 to 17-05-2004 Cad Engineer/draughtsman
(civil engg.&contractor-4 staff)
Projects:
 Residential (koothapakkam) –New build, 2 storey 2050 sq.ft Residential building with store,living,3 bed room,living,kitchen cum dining .

 Residential (chellankuppam)–New build, single storey 1100 sq.ft Residential building with living,2 bed room,living,kitchen cum dining .

 Residential (koothapakkam) –New build, single storey 1350 sq.ft Residential building with utility,living,3 bed room,kitchen cum dining .
Responsiblities:
 Preparation of full construction drawings
 Detailed drawings
 Site supervision
 Used Autocad R2000
Reason for leaving : Project finished
Armonia Estates Ltd, Cyprus, Europe 16-12-2001 to 12-11-2002 Architectural Draughtsman
(Construction and Property Developers – Leptos group) & Architect-1000+staffs)
Projects:
 Vikla village- New build 80+ villa (approx. 2000 sq.ft. each villa)
 Coral bay - New build 100 villa (approx. 3000 sq.ft. each villa)
 Kamaras - New build-110+ villa (approx. 1800 sq.ft. each villa)
Responsibilities:
 Preparation of full construction drawings
 Detailed Bath,Wardrobe,Kitchen drawings
 Report to Project Architect
 Used Autocad 2000i
Reason for leaving : contract finished
A & N Constructions 05-01-2001 to 10-12-2001 Cad draughtsman
(Civil engg.&contractor-4 staff)
Projects:
 Residential (pondy)–New build, 2 storey with basement floor 700 Sq.m Residential building with store,Garage,office,living,2 bed room,family room,kitchen ,utility. Value : U$ 96000 ,1 year
Responsiblities:
 Preparation of full construction drawings
 Detailed drawings
 Liasion with clients and consultants
 Used Autocad R2000

Reason for leaving : I got abroad chance to work in Cyprus
A’S Associates pte ltd.,Singapore 16-08-1997 to 15-06-2000 Cad draftsman
(Sanitary & Plumbing mep Contractor –30 staff)
Projects:
 Residential building-New build Aspen heights condominiums 16 Block ,13 storey (S$10M)

 Office building – new build China squre /Prudential tower 30-Storey two block ((S$7.5 M)

 Office building – new build Singaore Exchange Centre 30 storey two block (S$7 M)

 Industrial building – new build WUS Printed circuit (s) pte ltd. 3 storey (S$1 M)

 Industrial building – new build Tagore lane project 5 storey (S$1 M)
Responsibilites:
 Preparation of full sanitary and plumbing layout construction drawings
 Preparation of shop drawings ,working drawings,details and as-built drawings
 Taking quantity of piping
 Amendendment of architectural and structural drawings
 Used Autocad –R 14
Reason for leaving : contract finished
National Computer Technology ,India 15-06-1995 to 08-08-1997 Cad Instructor
(Education center –15 Staff)
Responsibilities:
 Teach and brief explanation of windows operating system
 Teach 2D and 3D commands
 Used Autocad -R 10 & R 12
Reason for leaving : I got abroad chance to work in Singapore and education centre closed and they change their business.
Prince Constructions,India 18-06-1992 to 31-05-1995 Draughtsman / site supervisor
(civil engg.&contractor- 3 staff)
Projects:
 Residential (Nellikuppam)–New build, single storey bed room,family room,kitchen 60sq.m
 Residential (bahoor) –New build ,single storey with 2 bed room store,Garage,office,living 120 sq.m
 Residential (panruti) –New build ,2 storey with 4 bed room store,office,living 225 sq.m
 Commercial building (Nellikuppam)– New build 2 storey with 8 shops 375 sq.m
Responsiblities:
 Preparation of full construction drawings
 Detailed drawings
 Preparation of estimation
 Site supervision
 Liasion with clients,subcontrators
 draughting (manual & cad)
 Used Autocad -R9 & R10

Reason for leaving : company closed

Public Works Department ,India 06-05-1991 to 05-05-1992 Civil engineer (Trainee)
( Cuddalore division – 100 staff )

Projects:
 Govt building –PWD,Collector office,circuit house, hospital, buildings maintainance and upgradation
 Irrigation – cannals,culvart,tank bunds

Responsiblities:
 Preparation of renevation building and irrigation drawings
 Preparation of tender document for maintained project
 Preparation of estimates
 Preparation of subdivision paybill document
 Training in draughting (manual)

Reason for leaving : One year training period finished

 Diploma in Civil Engineering, Muthiah Polytechnic, Annamalai Nagar, India. (April ‘1990)
 Diploma in Advanced Architectural CADD & Certificate Course on Structural Analysis & Design,using (GTSTRUDL) CADD Centre India Private Limited Chennai, India. (Nov.2000)
 Certificate Course on Micro Station SE, IT Knowledge, Singapore (Mar-2000)
 Certificate Course on Ms-Office 2000, Informatics, Singapore (June-2000)
 Diploma in Graphic Design, ACS, Semmandalem , cuddalore, India.(April -2001)
 Diploma in HVAC , Hvac Training Institute ,hyderabad , India (Oct- 2006

Autocad 2008 8 /10 MS Word 6/10
Architectural Desk Top 4/10 MS Excel 3/10
Archi cad 4/10 MS Powerpoint 3/10
Revit 2/10 GT Strudl 1/10
3D Studio Max 4/10 Stadd pro 1/10
Microstation 2/10 Photoshop 3/10
Pagemaker 3/10 Coreldraw 4/10

learning new skills