CV Electrical Engineer Motors, Generators, Control Panels, Purifiers, water softners

Resume built for oil and gas job opportunities by a jobseeker with experience in Electrical Engineer Motors, Generators, Control Panels, Purifiers, water softners - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 88488
Last Updated: Wednesday, February 25, 2009

Respected Sir,
I am in the market for very good job. I am qualified for the work by training and experience. My attached resume lists my education and work experience. I have spent the last three years working with other electrical engineers to design, develop, test, and/or supervise the manufacturing and installation of electrical equipment, components, or systems to be used for commercial, industrial, military, or scientific products-as needed.
Are you available to get together in person to talk about this position and what you are looking for in the individual you hire?

Pakistan’s First 6MVA submerged Electric Arc Furnace that is totally PLC controlled and erect with cooperation of Pakistanis and Chinese Engineers. This plant able Pakistan to produce ferro manganese in his own country first time in the history.
•Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
•Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
•Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
•Install ground leads and connect power cables to equipment, such as motors.
•Inspection and maintenance of overhead crane panels (30 Ton).
•Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.
•Repair or replace wiring, equipment, and fixtures, using hand tools and power tools.
•Maintain inventory lists and requisitions supplies, materials and repair parts.
•Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safety codes.
•Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, meggers to ensure compatibility and safety of system.
•Advise management on whether continued operation of equipment could be hazardous.
•Direct and train workers to install, maintain, or repair generator panels, electrical wiring, equipments, and fixtures.
•Perform business management duties such as maintaining records and files, preparing reports and ordering supplies and equipment.
•Provide preliminary sketches and cost estimates for materials and services.I can also easily read & understand Electrical Drawings of RLC and PLC systems.
•Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, meggers, and test lamps.
•Deployment of manpower for schedule & unscheduled maintenance.
•Prepare written reports on ongoing projects and on the condition of machinery.
•Performed preventative maintenance and repairs on equipment such as boilers, cooling towers, air compressors, pumps, fans, heat exchangers (shell & tube & plate to plate).
•Inspect and test system to verify system compliance with plans and specifications and to detect malfunctions.
•Inspected, adjusted, repaired, replaced, and performed preventative maintenance of heating, cooling, air-conditioning, and ventilating equipment and controls.
•Maintenance work performed on Caterpillar 3616 (6 HFO Generators) that is 4337.5 KVA each and GE Jenbacher JGS.620GS- NL (4 Gas Generators) that is 3780 KVA each and total power house capacity is 33 MW.
•Perform different types of tests on generators A-Van Kaick and Leroy Somer.
•Enormous knowledge of the operation and maintenance of high-pressure boilers and related mechanical equipment.
•Available for engine start-ups/shutdowns/emergencies and worked with the power plant operators to ensure engine generators production and reliability.
•Inspection of different types of relays in generator and feeder control panels.
•Daily, weekly, monthly Inspection of batteries bank and yearly inspection carry out with batteries load tester.
•Thorough knowledge of the occupational hazards and safety precautions applicable to the work.
•Active role in inspection, maintenance, calibration and installation of different types of gauges, analogue & digital meters, level switches, censers, temperature controllers, pt 100 etc…
•Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
•Fault tracing and rectification in heavy furnace oil & lube oil purifiers.
•Maintained tools and equipment and kept parts and supplies in order.
•Disassembled defective electrical equipment, replaced defective or worn parts, and reassembled equipment, using hand tools.
•Examined electrical units for loose connections and broken insulation and tightened connections, using hand tools.
•Termination of Cable Ends, Indoor, Outdoor, Straight Joints etc.
•Scheduled & unscheduled maintenance of electrical and electronics equipment.
•Make periodic inspections to see that all equipment and controls are operating properly and are in good condition.
•Maintained and repaired water softeners.
•Responded to calls for emergency repair service.
•Performed semi-skilled and unskilled laboring duties related to the installation, maintenance and repair of a wide variety of electrical systems and equipment.

1.Matric from Board of Intermediate and secondary education Multan.
2.Diploma of Associate Engineer in Electrical Technology from GPI Burewala.
3.Bachelors Technical in Electrical Technology from PIMSAT Lahore.

Very well know how about Computer Applications like, Microsoft Word, Excel, PowerPoint, Access, In page, Internet, email, Windows and other operating systems.

•Extensive working knowledge of the basics of electricity.
•Remarkable ability to read and interpret maps and electrical drawings.
•Thorough knowledge of electrical theory, methods, practices, and materials used in the testing and repair of electric motors.
•Thorough knowledge of safe work procedures and practices involved in the removal, repair, and installation of electric motors.
•Profound ability to isolate defects in wiring, switches, motors, generators and other electrical equipment.
•Strong ability to install and maintain motors, lighting fixtures, generators, circuit breakers, and transformers.
•Deep knowledge of electrical systems including planning additions and modifications on secondary circuits.
•Sound understanding of High Voltage protection relays and SCADA systems used in power house environment.
•Considerable knowledge of meter location, meter reading, utility record keeping, and service procedures.
•Strong ability to read commercial electrical blueprints and apply NEC through the full range of commercial and industrial maintenance and construction work.
•Uncommon ability to install and maintain motors, welding equipment, lighting fixtures, generators, circuit breakers, and transformers.
•Profound ability to use appropriate tools and diagnostic equipment to repair, install, replace, and test electrical circuits, equipment and appliances.
•Excellent ability to diagnose and repair electrical controls, industrial motor control centers, and programmable logic controllers.
•Strong ability to assume responsibility and to use sound judgment.
•Uncommon ability to convert engineering principles into effective designs.
•Strong ability to study and comprehend new technology.
•Uncommon ability to keep records and prepare reports and enter data into computer terminal.
•Great ability to assign work to employees, prioritize the work of others and organize and coordinate the work of the unit.
•Excellent ability to establish and maintain effective working relationships with citizens, division heads, supervisors, co-workers, and contractors.
•Strong ability to perform strenuous physical labor for extended periods of time to work outdoors under a wide variety of weather conditions.