CV E & I Inspector / Engineer, AVEVA PDMS 3D, Germanischer Lloyd (GL) Group

Resume built for oil and gas job opportunities by a jobseeker with experience in E & I Inspector / Engineer, AVEVA PDMS 3D, Germanischer Lloyd (GL) Group - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 88723

• Degree in Electronic Engineering with total of nine years experience as Maintenance Engineer in manufacturing industry.
• Certified Oil and Gas Instrument Inspector (COGII) with Certificate
Conducted in association with APITINDO, DISNAKER, and IKBAL-M-YOS, Batam Island, Indonesia.
• Experience on various Oil and Gas Instruments, Instrument hook up, Instrument Support installation, Calibration and Testing of Instrument, and installation & testing of Tubing and Instrument Air Sub Header.
• Understanding of review the related instrumentation drawing such as Piping and Instrumentation Diagram (P&ID), and selection material as required.
• Understanding of ESD system, PSV & SDV system, alarm & shutdown system management and other plant safety equipment system.
• Understanding of O & G documentation and specification review, Mechanical Completion procedure and commissioning i.e ITP, ITR, Punch list and Dossier.
• Having basic experience in the various PLC systems such as Omron (CQM & CPM), Allen Bradley (Micrologix 1000 & SLC-500) and Siemens S7-300.
• Familiar and experience in AutoCAD and AVEVA PDMS 3D Modeling designer.
• Experience on generating Standard Operating Procedure (SOP), Work Instruction and Engineering Report.
• Experience in expediting role and following up the order of materials.

Freelance E & I Inspector to Germanischer Lloyd (GL) Group
January 2008 – Present

Duration : Oct- 08 to Dec-08
Job Title : 3rd Party Expeditor/Inspector
Project Name : PECIKO6 Development Project - Expediting and Final Inspection of Pressure & Diff. Pressure Transmitter and Flow Transmitter on EMERSON Process Management Singapore.
Client : PT. Gunanusa Utama Fabricators for TOTAL INDONESIE E & P
Job Description:
• Conduct expediting visit to check the latest status of manufacturing schedule and available materials in the floor shop to identify the progress of fabrication, and to follow up the delivery schedule.
• Monitor and Ensure Supplier's Delivery Progress and report on non-compliance cases.
• Conduct Final Inspection to vendor site in order to ensure all materials being ordered are in accordance with the specification of PO and applicable reference documents prior shipment to the client.
• Review the documentation/material certificates.

Field Training
PT. Nippon Steel Batam, Instructor: Mr. Waluya Priyatna (Commissioning Eng of ConocoPhillips)
North Belut Well Head Platform (WHP) Project of ConocoPhillips, June 2008
Scope of Training:
• Various oil and gas instrumentation: Pressure indicator/transmitter, Temperature indicator/transmitter, Level indicator/transmitter, flow meter/transmitter, DPT, DPI, SDV, PSV, various valves, well head control panel, MCC, and ESD system.
• P & ID interpretation, hook up instrument, calibration of instrument, Mechanical completion (MC) and its documentation: ITR & ITP.

PT. UNISEM Batam
December 1999 – Present
Job Title: Test Maintenance Engineer
Responsibilities:
• Supervisory of Preventive Maintenance (PM) group for Analog & Logic Testing Equipment.
• Maintain the condition of the equipment to reduce downtime by performing scheduled Preventive Maintenance (PM) and Calibration.
• Responsible for repair of down equipment and new equipment setup, installation, commissioning up to production stage.
• Conduct problem-solving analysis to find out possible ways to minimize or eliminate equipment downtime.
• Monitor and maintain all spare part issues to achieve higher lifetime and zero breakdown target.
• Involve in the maintenance cost reduction program by build the partnership with 3rd party vendor and supplier for the lower cost but same quality of spare part.
• Establish the communication to the client in relation with equipment and product issues.
• Responsible in preparation and generating the Engineering Report.
• Generate the Standard Operating Procedure (SOP) and Working Instruction for equipment.

Brawijaya University, Indonesia
BSc. Degree in Electrical Engineering, 1999
Majoring in Electronic Engineering
GPA: 3.21 of 4

Professional Maritime & Offshore school Ikbal-M-Yos, Batam Island, Indonesia (www.ikbalmyos.com)
Certified Oil & Gas Instrumentation Inspector (COGII), Certificate No. 054/INST-IV/VII/2008.
March – July 2008

MS Office, AutoCAD and Aveva PDMS

- Having basic experience in the various PLC systems such as Omron (CQM & CPM), Allen Bradley (Micrologix 1000 & SLC-500) and Siemens S7-300.
- Familiar and experience in AutoCAD and AVEVA PDMS 3D Modeling designer.