CV Welding Inspector, QC Engineer, Radiographic film Interpretation

Resume built for oil and gas job opportunities by a jobseeker with experience in Welding Inspector, QC Engineer, Radiographic film Interpretation - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 88866
Last Updated: Tuesday, January 27, 2009

Looking for a challenging opportunity as QC Engineer/Inspector- Welding in Construction/ Petrochemical/ Marine fields with good working environment and opportunity for career growth where I can fully utilize the knowledge and skills acquired through my education and experience.

Company: ABS(American Bureau of Shipping) Consulting Inc.
Period: Dec’2008- Till date

Project: Sulfur Expansion Project
Client: Abu Dhabi oil refining company/Tebodin Middle East
Designation: Welding Inspector
Duties & Responsibilities:

Review of approved documents

All qualifications-welding procedure and welder qualification

Interpretation of RT films.

Company: KBR (Kellogg Brown &Root)
Period: Nov’2007- Aug’2008

Project: Pearl GTL Project, Qatar
Client: Shell/Qatar Petroleum
Designation: Welding Inspector
Duties & Responsibilities:

- Assigned to Feed Gas Preparation unit (FGP) as the company welding inspector.

- Review all approved documents such as project QCP, ITP, WPS, NDE procedures, etc.

- Witness all qualifications.

- Approve the qualification reports

- Monitor daily welding related activities in fabrication shop (separated for CS, LTCS, SS, and low alloy) and ensure full implementation of specification and standards (Shell DEPs, ASME, API, AWS, sections etc.)

- Closely monitor the consumable control system, such as baking and holding of low hydrogen type electrodes, issue and return system of electrodes and filler wires

- Performed welding and piping inspection and ensure all fabrication and installation as written in ITP, per Company Specification and/or Code.

- Ensure all NDE have been performed and witnessed as in project spec. and ITP

- Witness to ferrite number (FN) measurement, positive material identification (PMI), and post weld heat treatment (PWHT) and hardness testing.

- Review all NDE results of qualification and production joints.

- RT film interpretation.

- Monitoring welder performance, repair follow up, penalty status, line NDE status etc.

- Coordination with various multidisciplinary contractors and their quality control surveillance.
- Issue TAA (Technical Assurance Alert.) as a notification of quality deviation.

- Attend the daily QC meeting with contractor.

- Weekly conduct the quality walk down with contractor management.

- Involve in the weekly safety walk down.

- Observe any unsafe activities and report to the management to contribute an INCIDENT AND INJURY FREE PROJECT, which is our project motto.


Company: Nasser Said AL-HAJRI Corporation
Period: April 2005 April 2007

1.Project: Gulf- farabi Paraffin and LAB project, Jubail, K.S.A
Client : SNC Lavalin
Designation: Q/C Engineer
Duties & Responsibilities:

- Assist the QA/QC Manager for preparing the procedure and method of statements keeping in mind the requirements of project specification and relevant codes& standards.

- Review the sub-contractors documents.

- Ensure all inspections before, during, after welding is performing as per approved ITP and some time perform the same inspections.

- Co-ordinate with the Client and Sub-contractor for all NDT Inspections

- RT film review (acceptance criteria per ASME sec.IX, B 31.3, AWS D1.1)

- Assist the QA/QC Manager in taking critical decisions by analyzing relevant codes (ASMEB31.3, Sec.IX, and AWSD1.1etc.)

- Check each test package prior to submission to ensure all inspection and NDE activities completed for that particular line by checking certain system generated reports like Line summary sheet, Line NDE status etc.

- Performing walk down inspection and raise punches for every deviation from spec/code that found prior to Hydro test.

- Checking Hydro test document and reports ensure all punch list been done and closed prior to testing.

- Responsible for witness each Hydro test and Leak Test.

- After test, ensures it is performing the flushing, blowing and re-torque.

- Responsible for reinstatement report after hydro test, check all piping and equipment been installed complete and ensure all complete report and record and prepare any as built drawing for any modification, prior to handed over for Pre Commissioning team.


2. Project: AR-RAZI V Methanol project, Jubail, K.S.A
Client: Mitsubishi Company Japan
Designation: Welding Inspector
Duties & Responsibilities:

- Prepare all draft WPSs (as per AWS D1.1, API 1104 or ASME Sect. IX coalescence with SABIC standards) for variety of material like CS,LTCS,SS(304L,316L,321),Low alloy(P11&P22),Inconel, high nickel cast etc. with selection of welding process fully or combine, and electrode to be used to achieve the most efficient and considering time and cost.

- Incorporate the client comments, if any, and resubmit until getting the final approval.

- Witness and take readings of all parameters that using in the procedure qualification test.

- Witness the destructive tests for PQR.

- Prepare and submit the actual WPSs and PQR along with the test reports.

- Assist the QA/QC Manager for preparing the procedures and Method of statements.

- Witness the welder qualification test and issue Welders ID cards

- Assess the welder’s quality on weekly basis by calculating the RT repair percentage and select penalty joints.

- Co-ordinate with the client and other inspectors for all inspections

- Notify the non conformance identified and recommending corrective actions to site supervisors through NCRs.

- Co-ordinate with the IT engineer to make QA/QC database.


Company: ALKHAJA COOPERHEAT
Period: January 2000 July 2004

1. Project: Ras Gas Train 3 & 4 Raslaffan, Qatar
Client: CCIC | Chiyoda-Snamprogetti
Designation: Film interpretation, Radiation protection officer (RPO)
Duties & Responsibilities:

- Visit all sites to ensure radioactive exposure is doing in a safe and controlled manner.

- Monitor the issue and return of isotopes and proper documents being maintained.


- Monitor the radiation dose rates according to National Radiation Protection Committees (Supreme Council, Qatar)

- Interpretation of RT Films

2. Project: Common Cooling Water Project, Raslaffan, Qatar
Client: CCIC
Designation: Film interpretation, Radiation protection officer (RPO)
Duties & Responsibilities:

- Visit all sites to ensure radioactive exposure is doing in a safe and controlled manner.

- Monitor the issue and return of isotopes and proper documents being maintained.

- Monitor the radiation dose rates according to National Radiation Protection Committees (Supreme Council, Qatar)

- Interpretation of RT Films
3. Project: Dhukan Gas Lifting Project (DGL), Dhukan, Qatar
Client: CCIC/ Snamprogetti
Designation: NDE supervisor
Duties & Responsibilities:

- Coordinate with operation and maintenance in performing and follow up inspection activities

- Supervision and manpower handling of NDE jobs.

- Interpretation of RT Films

4. Project: Sulphur Recovery Expansion Project, Rasalaffan, Qatar
Client: Mecon-Karaffi / Technip
Designation: NDE supervisor
Duties & Responsibilities:

- Supervise NDT jobs performed by NDT crews.

- Inspect NDE equipment and tools for condition assessment and prepare
necessary reports.

- Interpretation of radiography films.

5. Project: Onshore Gas Development (OGD Phase II, Abshan, Abu Dhabi)
Client: CCIC/ Technip-Bechtel JV
Designation: NDE coordinator
Duties & Responsibilities:

- Coordinate with the NDE crews and client for all site inspection like RT, PT, MT and UT.

- Interpretation of radiography films.


Company: WENS Inspection group, Chennai, India
Period: Aug1996- Dec1999

Working as an inspector, technician and an assistant at joining time and carried out different duties like:

- Visual inspection of welds

- Radiography on pipe and tube welds

- MPI and DPI on pipe, tube and structural welds

- UT thickness scanning

- Radiography film interpretation

The various projects are,

Tamil Nadu Petroproducts, Manali, Chennai (TPL)

Ennore thermal power station, Chennai (ETPS)

South India Constructions
Saint Gobbain Glass Factory, Chennai.

Gulf Constructions (Pvt.) Ltd.
Indian Oil Corporation Ltd., Kadappa, Andhra Pradesh

Madras Fertilizer Limited (MFL)

UB Engineering, FACT, Kerala

Madras Refinery Limited (MRL)

Technical

Diploma Engineering

Additional courses certificates

CWI-American Welding Society

ASNT-Level II-RT, MT, PT,UT

Radiation Protection Officer (RPO)-Supreme Council, Qatar

Certified Radiographer-BARC, India

Microsoft office

RT film Interpretation