CV Lead Engineer (Piping) – PDMS Modeler

Resume built for oil and gas job opportunities by a jobseeker with experience in Lead Engineer (Piping) – PDMS Modeler - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 89543
Last Updated: Saturday, February 7, 2009

 About 10 years of domestic & international experience in the fields of Designing, Commissioning, & servicing of Piping & Plant Designing pertaining to Oil & Gas, Pharama & Chemical Industries.
 Good experience in whole work process specifically involving piping design and engineering activities such as piping layouts, supports, PDMS, Materials and bidding documents.
 Expertise in using Software’s like PDMS 11.5 SP2, NAVIS JET STREAM, AUTOCAD, 3D Modeling, MS Office etc.
 Hands on experience in PDMS all design, admin and draft modules, AutoCAD and MS operating systems.
 Well versed with the usage of International Codes such as ASME, API, ASTM, IS, SHELL, NFPA, ANSI, TEMA, OISD, AWWS, NFPA etc for the above activities.
 Trained & Certified by AVEVA VANTAGE in PDMS 11.5 SP4 for all modules of Design, admin such as Piping, Equipment, structural modeling, DRAFT, ADMIN,PARAGON, SPECON etc.
 Have knowledge in CGMP & CGLP, HVAC controls for Class 100000 clean room projects.
 Handled various projects independently right from detailed engineering to the commissioning.
 Well versed with the general engineering interfaces like proper utilization of area, making group of combinations with consideration of operational moment and economical values, future provisions and operational ability and maintenance and construction requirements.
 Hands on experience in the preparation, review of plot plan, conceptual equipment layouts, nozzle orientation drawings, vessel trim drawings, as built drawings, and general arrangement of piping layouts, pipe rack layout.
 Self-Motivated, able to work independently and in teams, handle multiple projects paying attention to details, accomplished problem solving, leadership and analytical Skills.
 Able to coordinate with client, consultants, and contractors to resolve technical issues arising in the implementation of the project.
 Have a site experience for chemical and pharma and clean room projects.
 Comprehensive expertise with objectives and contents for work deliverables like 3D model, isometric delivery, final material takeoff, bid summaries, vendor drawing reviews, GA drawings acquired by working through basic / FEED detail engineering packages for oil and gas.
 Knowledge to analyze flexibility requirements and the stress analysis reports to improve the system design and to ensure the safe design system.
 Have some exposure in HAZOP studies. and able to understand the process simulations.
 Participated in the pre design on site survey for getting the customer requirements w.r.t. as build drawings, material conformity from existing plant.
 Familiar with pressure integrity, pressure drop calculations.
 Able to lead the team and designers and have participated in various commissioning activities

Currently working in FBSE (from Luminious Engineering Technology India Pvt Ltd. LETIPL) Sweden, from August 2008 to till date in Sweden at Gothenburg.

CURRENT PROJECT
1. Project Name: VALEX (Valeraldehyde Expansion)
Client PERSTROP Oxo Sweden
Role Area Lead Engineer (piping) – PDMS Modeler (for ALCHAHOL area)
Team Size 05
Duration Aug 2008 – Till date

RESPONSIBILITES:
 Utilization of Software’s such as PDMS, AutoCAD for designing various projects’ engineering activities.
 Preparation of piping layouts and supports and 3D modeling of equipments and piping and using PDMS.using specifications and standard drawings, design instructions, plot plan, flow diagram, line list and supplier information.
 Analyze and cross checking of flexibility requirements and stress analysis reports to improve the piping designing system by ensuring safety design codes and standards.
 Analysis and implementation of platform requirements and coordinate with respective departments and to get the approval from clients.
 Extraction of reports for cross checking of line numbering w.r.t line list, and extraction of reports for clash checking.
 Extraction of isometrics and cross checking for the same.
 Coordinate piping design activities with other design and engineering groups.
 Preparation of MTO’s.
 Cross checking of vendor drawings for nozzle orientation as per the process and layout requirements.
 Preparation of nozzle orientation for static equipments.
 Detail designing of pipe rack requirements and like cross sectional elevation and plan with respect to onsite buildings or process plants.
 Cross checking of P&IDs, and coordinating with process department regarding any deviations or implementation as per the layout and standards.
WORK EXPERIENCE – 2:
Worked in SIMON CARVES India Ltd. (a Punjlloyd company) as a lead engineer from April 2007 to August 2008.
SCIL is one of the leading EPC company head quartered in UK providing solutions for Oil & Gas, Petrochemical Refinery, Chemical Industries.
PROJECTS WORKED:
1. Project Name: SAUDI KAYAN 300ktpa LDPE PLANT
Client Saudi Kayan Petrochemical Company
Role Lead Design Engineer for Hot water Area
Team Size 15
Duration Oct 2006 – May 2008

RESPONSIBILITIES:
 Utilization of Software’s such as PDMS, AutoCAD for designing various projects’ engineering activities.
 Preparations of 3D model for equipment, piping, fire fighting and escape routing and supports using the above standards.
 Extraction of reports and cross checking of isometrics from PDMS,
 Analyze results to identify trends and potential failures & recommend early measures to avoid the same. Like analysis of flexibility requirements and stress analysis reports,
 Planning and routing of pipe rack.
 Preparations of detailing engineering activities such as cross sectional elevation of pipe rack and detailed plans, isometrics using AutoCAD.
 Initiate the development of all required discipline deliverables like preliminary vendor drawings for equipments & package systems instruments for the assigned areas.
 Identify & record the deviations as per the scope and escalate the same to the project manager for the corrective action.
 Review and approve area / unit piping design drawings and isometrics
OTHER PROJECTS:
2. Project Name: SABHA SARAWAK GAS PIPELINE (500 kms 36” gas Pipeline in Malaysia)(proposal project)
Client SABHA SARWAK GAS PIPELINE
Role LEAD DESIGN ENGINEER
Team Size 08
Duration Jan 2007- Oct 2007

RESPONSIBILITIES:
 Preparation of engineering and design documents for ITB, tendering and procurement documents such as MR, VMR, PMS etc.
 Preparation of conceptual equipment and piping layout for compressor station and metering stations and block valve stations,
 Preparation of MTO.
 Cross checking of typical piping layout drawings given by the client and to improve the supposed layout.
 Cross checking of records and scope of work, and raising the quires to project department,

WORK EXPERIENCE - 3:
Worked in ZEN Consultants Hyderabad as a Piping Engineer, Site Engineer from 1999 July to March 2007.
ZEN is a Engineering consulting company for the pharma & chemical industries in India

SCOPE OF WORK:
 Preparation and implementation of engineering projects for Pharma and chemical industries).
 Provision of concept ional building layouts, equipment layouts as per the process requirements.
 Provision of plot plan generation such as warehouses, Explosive tank farm areas and non explosive tank farm areas, utility buildings, and process hazardous areas and other accessories, like ETP etc.
 Planning and routing of pipe rack. Preparation of detailing documents such as crosses sectional elevation of pipe rack and detailed plans, isometrics using AutoCAD.
 Preparation of load list for buildings and pipe racks.
 Drafting isometrics, plans, elevations and for utility manifolds, Process manifolds.
 Planning of routing of process piping for chemical, pharma and fermentation plants.(such as for reactors, fermentors, and RCVD’S and centrifuges).Provision of detailed documents using the AutoCAD.
 Provision of detailed piping layout for explosive and non-explosive tank farms. And utility systems such as steam ejector system and cooling towers and chilling plants.
 Provision of utility and process equipment layouts.
 Provision of BOQ for pipe racks and process pipes.
 Calculation of insulation areas for equipments and pipes.
 And other documents for utility piping requirements like ULD’s (schematic drawings for utility piping).
 Bill of quantities for valves.
 Preparation of equipment list, and line list
 Preparation of basic and engineering manuals.
 Worked as site engineer for CONCORD BIOTECH LTD, Ahmedabad, Gujarat I.e.; fermentation plant. and VASANTH CHAMICALS, jeedimetla, hyderabad.i: e; nitration block.
 Preparation of technical and commercial comparison for the bidding (like AHU units)
 Worked as site engineer for Dr.reddy’s labs as a site engineer for animal house project that is clean project for class 1, 00,000 clean room, Have knowledge on CGMP, CGLP CONTROL for clean room and pharma projects.

 Passed SSC in First Class from BPS & Jr. College Sarapaka in 1996.
 Passed Diploma In Mechanical Engineering in First Class from AANM & VVRSR Polytechnic College Gudlavalleru in 1999

Autocad
PDMS 11.5 SP2
ms excel and word

have got trained ny AVEVA VANTAGE PDMS for all design and admin modules,

have site experience for chemical and pharma plants,

have some explosure in HVAC clean room projects