CV Occupational Health & Safety Engineer, ETA, FTA, QRAS, RAM, FMEA, HAZOP, ISO 14001 EMS Standard

Resume built for oil and gas job opportunities by a jobseeker with experience in Occupational Health & Safety Engineer, ETA, FTA, QRAS, RAM, FMEA, HAZOP, ISO 14001 EMS Standard - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 89622
Last Updated: Monday, February 9, 2009

I am a graduate Mechanical Engineer turned Marine Engineer. Possess NEBOSH-IGC & OHSAS 18001 Lead Auditor and other HSE Certification with almost 7 years of Experience.
Currently working in an Electromechanical Company as an Occupational Health & Safety Engineer.
Looking forward for a suitable Job in your esteemed organization.
My detailed CV is enclosed for your perusal.

JOB HISTORY
Employer (Present Job) Al Bonian International
Electromechanical Works & Maintenance L.L.C. Dubai
(June 2007 – till to date)
Position : Occupational Health & Safety Manager
Project : All Company Projects
Scope : High-Rise Buildings up to 62 Floors, Malls, Commercial/Residential Buildings & Villas
Responsibilities :

 Leading a team of 40 Safety Personnel, 2000+ employees at various construction sites & Maintenance
 Reduced the number of documented injuries among 700 employees by 90% (from 10 to 1) within one year.
 Established, enforced, maintained & updated Policies and Procedures including the following: Injury and Illness Prevention Program, Emergency Action Plan, Personal Protective Equipment procedures, and Safety Contingency Plans. Revised policies and procedures to minimize potential hazards.
 Ensured compliance with Federal and Local regulations through comprehensive inspections and communication.
 Coordinating subcontractor’s safety procedures, activities, method statements & Risk Assessments
 Provide compliance assistance to subcontractor employees and the public on a variety of health & safety issues through abatement assistance, off-site consultative services, distributing printed material, giving speeches, conducting seminars and delivering training.
 Ensuring Preventive Control measures are suitable & sufficient for the purpose intended
 Conducting Safety Committee Meetings & Induction at all levels
 Amend OH&S Policy after Investigating an Incident report should I discover any short-falls.
 Ensure Labor Welfare facilities are adequate at labor camps in accordance with OH&S standards
 Availing Material Safety Data Sheets (MSDS) on chemicals used in the workplace.
 Raising NC’s with proposed corrective actions and Reporting and advising to top management
 Carrying out OH&S Audits (Internal & External)
 Reviewing Environmental Risk Assessment, Statement-of-Works, Plans & Procedures
 Organizing Training & Developmental programs



Employer : Precision Engineering Works, Vizag
(Dec 2004 – May 2007)
Position : Safety Engineer
Responsibilities :

 Supervising Maintenance & Overhauling of Ship Engines & Accessories
 Carrying out Risk Assessment & Inspection before, during & after critical works
 Follow up surveyor instructions & complying with the standards
 Carrying out inspection of Fire fighting equipments & Life saving appliances
 Maintained and performed weekly and quarterly inspections of the fire pumps and systems and identified the need for routine maintenance. Ordered charts and equipment for proper maintenance and established regular testing schedules.
 Detects and evaluates hazards, documents in such a manner as to support the citation, issues notices to stop work until an imminent danger hazard is eliminated, provides technical advice on how to control safety and health problems.
 Reviewing Method Statement to identify potential hazards and put suitable and sufficient control measure
 Participating in Accident Investigation and prepare incident report
 Responded to employee injuries and administered first aid as needed for propane leaks (evacuations), cuts and bleeding, and back injuries from improper lifting techniques.
 Conducting & Supervising Mocks Drills for Emergency, Fire & Safety
 Taking corrective action on NC’s and following up with officers concerned



Employer : The Shipping Corporation of India Ltd.-Mumbai
(May 2004– Dec 2004)
Position : Marine Engineer, Crude Oil Ship (DWT 95540)
Responsibilities :

 Taking Bunkers of L.O., Heavy Oil, Diesel Oil, Hydraulic Oil
 Maintenance of Engine room Running and Stand –By Machinery
 Starting, Paralleling & Change Over of Generators
 Attending Breakdown Maintenance Job & Maintaining of Engine Room Log Book
 Maintenance of Deck Machinery (Cargo cranes, Mooring Winches, Capstan, Anchor Windlass, Hydraulics, Etc)
 Carrying out risk assessment and preparing Method Statement
 Interpreting Drawings bridging between Ship Engineers & Shipyard
 Maintaining Inventory, Raising Indent, Follow up of Procurement Order & Receiving materials

Bachelor of Mechanical Engineering
NEBOSH-IGC, UK (Distinction)
OHSAS 18001 Lead Auditor (IRCA)
EN ISO 9001:2008 QMS Lead Auditor (IRCA)
Safety Manager/Director PDP, OSHAcademy, USA
Marine Officers Training, C.O.C. Class IV Part-A (F.G)
Safety Advisor Registration - EHS & Nakheel - Level 1
Fire Prevention and Fire Fighting - Level 1
Advanced Fire Fighting - Level 2
Elementary First Aid - Level 1
Medical First Aid - Level 2
Oil Tanker Familiarization
Dangerous Cargo Endorsement (Oil) - Level 1
Personal Safety & Social Responsibilities
Personal Survival Techniques
Proficiency in Survival Crafts & Rescue Boats
Engine Room Simulator
Small Industries Management Program, I. I. T Madras
IELTS (British Council) Band: 6.5 S-7, L-7, R-6.5, W-6.0
Emirates Safety Group, UAE - Corporate Member
Indian Institute of Marine Engineers, India – Associate Member

MS Office, Internet Navigation, C Language

Result-Oriented Counselor
Knowledge of ETA, FTA, QRAS, RAM, FMEA, HAZOP, ISO 14001 EMS Standard, etc.
Outstanding interpersonal, Presentation & Training skills with proven ability to interact effectively with Multi-nationals workforce and all levels of Management
Expert in Inspecting and Evaluating workplaces for safety hazards and recommending and implementing safe workplace policies and procedures