CV FPSO Lead Electrical Commissioning Technician

Resume built for oil and gas job opportunities by a jobseeker with experience in FPSO Lead Electrical Commissioning Technician - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 91239
Last Updated: Saturday, March 14, 2009

PROFILE: A HIGHLY COMPETENT ELECTRICAL COMMISSIONING TECHNICIAN.
• With overseas experience in the Oil, Gas & Power industries; a knowledge of both onshore / offshore construction and commissioning.
• The ability to effectively carry out, motivate, organise and co-ordinate the activities of a multi- cultural workforce with performance evaluating and coaching skills;
• The ability to effectively conduct and document tool-box safety talks as a safety tool;
• A systematic approach to commissioning, troubleshooting and diagnosing problems associated with electrical distribution, relay protection and AC/DC drives.
• A high standard of health and safety awareness;
• The ability to prepare & implement controlled documentation of electrical safety rules;
• The ability to ensure the correct operation of a Permit-to-Work system is achieved;
• Interpretation and application of electrical engineering schematic and wiring diagrams;
• Hazardous location electrical equipment inspections (11kv);

FPSO FRADE – BRAZIL (CHEVRON)
SBM OFFSHORE
DUBAI DRYDOCKS, UAE
JULY 2008 – JANUARY 2009

Lead Electrical Commissioning Technician

Work description:
- Prepare work packs
- Assist in the preparation of risk assessments
- Assist Vendors Engineers.
- Direct Electrical Technicians in the daily duties.
- Assist the Electrical Engineers during high voltage switching operations
- Ensure all relevant certification is completed.
- Highlight any work problems to the Electrical Engineer.
- Prepare Work Permits
- Operate and maintain frig log.
- Control and issue test equipment
- Give tool box talks and record.
- Good understanding of SLD’s.


FPSO AKPO
TOTAL UPSTREAM- NIGERIA
ULSAN, KOREA

APRIL 2008- JUNE 2008
Project: FPSO AKPO Joint Venture of HHI & TECHNIP
Onshore/Offshore

Electrical Inspector (Commissioning)
Work description:

- To insure that all the company specification has been implemented in all Electrical Installation and functionality testings.
- To insure that all commissioning procedures has been carried out as per client’s specifications.
- To insure that all the sub-contractors has been following the standard procedures as per safety rules and regulation.
- Strict implementation of Permit to Work system.
- To insure that all the testings has been documented in both contractors and client prior to handover.


FPSO VINCENT
KEPPEL SHIPYARD
TUAS, SINGAPORE
JANUARY 14, 2008- APRIL 18, 2008

Electrical Technician (Commissioning)

Work Descriptions:

- Assist to ABB vendors in wiring modifications of control circuits for HighVoltage 11KV / 6.8KV, Low Voltage 400V switchboards including function test.
- Carry out DC pressure test in each HV and LV vacuum circuit breakers, voltage transformers, and busbars using Hi-pot tester.
- Carry out ducter test on each VCB, VT, and busbars using MOM 600A Programma Microohmmeter.
- Perform ratio test on voltage transformers using Sverker 750 Programma Relay Test System current/voltage injector.
- Verify all signals/alarms of switchboards in Power Management Panel.
- Perform other functions from time to time.
- Insure strict implementation of Permit To Work system.


MALAYSIA DEEPWATER FLOATING TERMINAL
FPSO (KIKEH)
MMHE SDN BHD
81707 Pasir Gudang, Johor Bahru
Malaysia

Project: FPSO (KIKEH) Joint Venture of MISC & Single Buoy Moorings
Onshore/Offshore
November 2006 to November 2007

Electrical Lead Technician (Commissioning)

Principle Deliverables:

- Prepare work packs
- Assist in the preparation of risk assessments
- Assist Vendors Engineers.
- Direct Electrical Technicians in the daily duties.
- Assist the Electrical Engineers during high voltage switching operations
- Ensure all relevant certification is completed.
- Highlight any work problems to the Electrical Engineer.
- Prepare Work Permits
- Operate and maintain frig log.
- Control and issue test equipment
- Give tool box talks and record.
- Good understanding of SLD’s.


MC DERMOTT CASPIAN CONTRACTOR INC.
DRILLING, PRODUCTION & ACCOMODATION PLATFORMS
Salyan Highway, Baku Deep Water Jacket Factory
3rd floor, Baku Azerbaijan

Project: Azeri Chirag Ghunasli Offshore Facilities
Azerbaijan International Operating Company/
British Petroleum
November 2004 to October 2006

Electrical Technician (Commissioning)

Work Descriptions:

- Assist to Switchgear and Instrumentation vendors in wiring modifications of control circuits for HighVoltage 11KV / 3.3KV, Low Voltage 440V switchboards including function test.
- Carry out DC pressure test in each HV and LV vacuum circuit breakers, voltage transformers, and busbars using Hi-pot tester.
- Carry out ductor test on each VCB, VT, and busbars using MOM 600A Programma Microohmeter.
- Perform ratio test on voltage transformers using Sverker 750 Programma Relay Test System current/voltage injector.
- Verify all signals/alarms of switchboards in Power Management Panel.
- Perform other functions from time to time.
- Ensure strict implementation of Permit To Work system.


VA TECH REYROLLE PROJECT LTD
Abu Dhabi, UAE
July 06, 2003 – July 05, 2004

Electrical Chargehand


Work Descriptions:

- Responsible for performance and directing the electrical precom/commissioning works and system procedures, onshore.
- Assist the completion and Integration Team in preparation of commissioning plan various activities during the development and execution of project.
- Directing the performance and supervise the functional testing and pre-commissioning activities of the project E & I system.
- Supervise and witness the subcontractor and vendor scope of works.
- Performed testing and powering-up of 11KV Switchgears, MCC Switchboards, transformers, UPS and Battery Charger.


SAIPEM – KAZAKHSTAN
KMWC PROJECT
June 03, 2002 – June 03, 2003

Electrical Technician

Work Descriptions:

- Working on infield pipelines, responsible for sub-station modification jobs. Wellheads & manifolds instrument installation, glanding and termination of instrument cables, continuity and megger test, loop checking, simulation of instrument, gas detectors, control valves, shut-off valves, and electronic transmitter.
- Carry out all Electrical Commissioning works in all electrical equipments such as MV/LV Switchgear , Emergency diesel generator, UPS System , Battery Bank and Battery Charger, Lighting System and Small Power Distribution Boards.
- Confirm all corresponding indications in PCS of all Electrical Process Control
- Ensure strict implementation of Permit to Work (PTW) system on the work site
- Carry out modification needed in the field of Electrical system
- Assist in testing of Public Address (PA) system


HYUNDAI ENG’G. & CONSTRUCTION CO.
TOTAL SOUTH PARS PROJECT
Assaluyeh Iran
Feb. 2001 – Sept. 2001

Electrical Technician

Work Descriptions:

- Glanding and termination for instrument cables. Responsible for loop checking, continuity test, megger test, simulation and calibration of instrument, control valves, shut-off valves, and electronic transmitter.


CONSOLIDATED CONTRACTORS INT’L CO.
ONSHORE GAS DEV. PROJ. II
Habshan, Abu Dhabi UAE
Sept. 1999 – Dec. 2000

Electrical Technician

Work Descriptions:

- Glanding & termination for instrument cables from marshalling to field instrument, installation of transmitters, simulation, loop checking, megger and continuity testing.


SAUDI OGER LTD.
TAIF, K.S.A.
Oct. 1997 – March 1999

Electrical Technician

Work Descriptions:

- Responsible for maintenance of all electrical equipment of Prince Abdullah Palace in CPRDO Taif, K.S.A. Maintenance of panel & power controls of switch gear automation. Trouble shooting faults, substation personnel.

EDUCATIONAL BACKGROUND
1991
Don Bosco Technical Center Industrial Electricity


SEMINARS / TRANING ATTENDED
• BP 8 Golden Rules of Safety ( Baku, Azerbaijan )
• Permit to Work System and 5 Days Orientation Seminar ( Baku, Azerbaijan )
• RTC (Risk Assess it Talk it Check it program, Baku Azerbaijan)
• BOSIET (Basic Offshore Safety Induction &Emergency Training)

Yes

-