CV B.Tech Mechanical Engineer Abu Dhabi Construction and Maintenance Company (ADMAC), U.A.E

Resume built for oil and gas job opportunities by a jobseeker with experience in B.Tech Mechanical Engineer Abu Dhabi Construction and Maintenance Company (ADMAC), U.A.E - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 92021

Application applied for: Project Engineer (Power Project / Infrastructure)

Resume headlines: B.Tech in Mechanical Engineering with two and half year experience in Power Sector 30 MW and 2X135 MW Power project and half year international exposure in Infrastructure Project ( Cross Country Trunk Sewage Pipe Line).


Cover Letter:

To,

HR Manager


Dear Official,

I am a B.Tech (Mechanical Engineering), I came to know that there are few openings in your prestigious company for entry level. So I want to apply for the same and attaching my resume with this humble request, it will furnish with the details relevant to my experience, skills, and, education. References and any other information you require shall be promptly provided upon your request.

As my resume indicates, I am a Mechanical Engineering. Graduate with the ability to give desired result in minimum duration time. I would now like to contribute and utilize my skills and abilities with your organization and would be thankful to you if you provide at least one chance to write assessment test cum interview for the same. Waiting for your kind response.

Experience :

Organization: Abu Dhabi Construction and Maintenance Company (ADMAC), U.A.E.

Project : Construction of Trunk Sewers & Associated Treated Sewage Effluent System for AL Wathba WWTP.

Duration : July 2008 -to date

Cost : 850 Million Dirham

Client : ADSSC

Consultant : Parson International

Contractor : ADMAC

Position : Project Engineer.

Job Profile:

• Construction of 2 X 1600mm Diameter, GRP trunk sewers, approx. 14 km long, including associated valve chambers from Mafraq inlet flow distribution chamber to the proposed AL Wathba Waste Water Treatment Plant.

• Construction of TSE transmission mains comprising 300mm to 2000mm diameter GRP pipelines including and associated valve chambers, approximately 72 km long, from the proposed AL Wathba WWTP to Khalifa cities A, B and C and IPS-3.

• 2600mm diameter GRP distribution manifold at Mafraq WWTP. New penstocks shall be installed in each new connection for isolation. Two 1200mm diameter lines will be extended from the manifold for sewage diversion. A Plug valve with a modulating actuator and electromagnetic flow meter will be installed at each outlet.


Firm: ARYAN COAL BENIFICATION PVT. LTD. CHAKABURA KATGHORA (C.G) INDIA

Duration: August 22, 2007 to July 2008.
Company Profile: Aryan Group is leader in the business of coal washing in India with an operating capacity of more than 20 million tons per annum at Dist. Korba in the State of Chhattisgarh and other states like Maharashtra, Andhra Pradesh and Orissa with overall capacity of 30 million tons per annum. There are up gradation and expansion plans to increase the production more than 40 million tons per annum at the end of year 2008.Aryan group has also set up 1x30 MW Power Plant in Dist. Korba, State Chhattisgarh and will be expanding by installing further 2 x135 MW sets which is in the developing stage IN Dist. Korba. Presently another 30 MW set is also under commissioning at the same place. We are targeting 300 MW capacities by end of 2009.

Job Profile: I worked with ACBPL as a Project Engineer (Mech.) in 2X135 MW Power Projects at Chakabura nearby Korba. The consultant was GHAUNXI G ENERGY LTD. CHINA. I did Project from grass root field i.e. Soil Investigation to commissioning.

Firm: SKS ISPAT AND POWER LTD SILTARA RAIPUR (C.G) INDIA

Duration: June 26, 2006 to July 30, 2007.

Company Profile: SKS ISPAT AND POWER PLANT is an Integrated Steel Plant produces Sponge iron and Steels having around 4 kiln, 12 Induction furnace and 4 Automotive Rolling Mills produce channels and TMT Bars .The firm is having 25 MW WHRB and 30 MW AFBC and 40 MW CFBC is under Project work reaches at the stage of Commissioning .The Company have a very long list of its routine clients and also have sufficient new Projects in India and also out of country Projects.

Job Profile: I worked with SKS ISPAT AND POWER PLANT as an Operation Engineer in 25 MW WHRB Power Plant having 2x12 TPH Thermal Boiler and 2x38 TPH Thermax Boiler. I do the complete Planning of Operation and Preventive Maintenance of Ash Handling Plant, Compressor, Centrifuge Oil Separator and as well as BFP, CW, ACW and Lube Oil Filter.

Technical Skills :

• Up to 125 TPH FBC Boiler (Make: CVPL, Thermax, Pressels) Erection & commissioning, Operation and maintenance.

• Erection & commissioning, Operation and maintenance of Turbines (SHANG DONG CHINA), Alternator (BHEL, TDPS), & Gear box (Triveni)

• Erection & commissioning Coal conveyor’s & Crusher, FHS system.

• Erection & commissioning ESP and Bag filter’s (Ash collecting system)

• Erection & commissioning Condenser (Surface / air)

• Erection & commissioning DM Plant (5m³/hr)

• Pump and Valves overhauling unto 500 HP, Multistage and centrifugal.

• Erection & commissioning Hydraulic and Pneumatic system.

• Knowledge of Edible oil Refinery having capacity of 1000 TP and 300 TPD.

• Fabrication & Erection of Steam and Water Piping.

• Fabrication & Erection of Flue Gas Ducting.


Key Skills :

 Cross Country Trunk Sewage Pipe Lines.

 Power Projects- 2X135 MW

 Power Plant ( O&M- 25 MW P/P )

 Finite Element Analysis/STAD-Pro/CAD

Qualification : B.TECH IN MECHANICAL ENGINEERING.

Professional-Profile :

S.No. Class/Semester Year of Passing Institute Board/university Percentage (%)
1. B.TECH
MECHANICAL
ENGINEERING 2006 R.K.G.I.T GHAZIABAD N.C.R DELHI U.P.T.U LUCKNOW 67


Design Soft-ware/Analysis :

S.No Name of the Software/ Analysis Institute
1. CAD R.K.G.I.T GHAZIABAD N.C.R (DELHI)
2. F.E.A / STAD-Pro / Ansys 5.4 -Do-


Project Undertaken . “MODELLING OF HEAT TRANSFER IN TRAPEZOIDAL
FIN BY FINITE ELEMENT ANALYSIS” as a team leader
in the group of four member.

Training Undergone . One Month ‘Vocational Training’ in Bhilai Steel Plant
(SAIL), Bhilai in the year 2004.

. One Month ‘Vocational Training’ in Bhilai Steel Plant
(SAIL), Bhilai in the year 2005.

 Finite Element Analysis/STAAD-Pro/CAD

Key Skills :

 Cross Country Trunk Sewage Pipe Lines.

 Power Projects- 2X135 MW

 Power Plant ( O&M- 25 MW P/P )

 Finite Element Analysis/STAAD-Pro/CAD