CV Process Engineer FEED AND DETAILED Engineering, Petro Canada, Bantrel, Bechtel subsidiary

Resume built for oil and gas job opportunities by a jobseeker with experience in Process Engineer FEED AND DETAILED Engineering, Petro Canada, Bantrel, Bechtel subsidiary - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 92459
Last Updated: Tuesday, May 19, 2009

Dear Sir/Madam,

Please accept enclosed resume for the position of Process Engineer.
I have over eleven years of experience with oil and gas industry practicing chemical engineering principles and theory in process engineering, plant commissioning and refinery technical services/support environment. I finished my Master’s degree in Chemical and Biochemical Engineering and achieved Professional Engineers of Ontario licence.
Graduate studies from the University of Western Ontario and extensive professional experience with Bantrel- A Bechtel subsidiary (Toronto, Canada) and NIRMA makes me most favorable candidate for Process Engineer position. While working with NIRMA Limited as a Process Engineer, my job responsibility was to commission PACOL section of LAB plant and Hydrotreater section of n-Paraffin plant and provides technical services to the front and back end section of Petrochemical complex including offsite and utilities. As a part of Bantrel team, I was responsible for relief load and relief valve sizing, relief header hydraulic calculation, major process line sizing for the Blowdown and Coker section of Delay Coker Unit, P&ID and PFD development and PHA and HAZOP study. Coordination with various disciplines and technology suppliers was also part of my job. I am conversant with HYSYS, PRO-II, Aspentech Flarenet and HTRI simulation packages and API/ASME codes.
To deal with such a challenging portfolio, I possess effective communication and interpersonal skills and in-depth knowledge of the subject. I am a very good team player, flexible and resourceful.

March 2006 – Jan 2009 | Process Engineer
Bantrel Co. subsidiary of Bechtel Corporation|
• Petro Canada, Montreal Horizon Project, Montreal, Quebec
Delay Coker for Petro Canada, Montreal Refinery (25,000 BPSD capacity)
FEED AND DETAILED Engineering
• Responsible for pump sizing, line sizing, pressure safety valve sizing and Process Flow Diagram, Utility Flow Diagram development and input to DP/DT diagram to accommodate a new Delayed Coker Unit
• P&ID and its supporting documents development for the process, Utility and Auxiliary system
 Line designation tables with line lists for various commodities
 Heat and mass balance, process simulation using HYSYS and PRO II
 Process Equipment design for shell and tube heat exchangers, pumps, vessels and tower internals
 Process Instrument Datasheets for flow orifices and flow meters
• Responsible for hydraulic calculations for control valve sizes and inlet laterals for safety valves
• Responsible for ISBL Flare header sizing by Aspentech Flarenet process simulation modeling, suggested cost effective modifications within project specific time frame
• Overviewed DBM for the relief system in coordination with project team
• Evaluated existing flare seal pan, new flare knock-out drum, air cooled condenser and hydraulic system adequacy for the change in design condition, prepared equipment datasheet
• Prepared Auxiliary pump seal flushing plan P&IDs from the vendor package drawings
• Evaluated existing exchanger rating by HTRI
• Successfully accomplished task of preparing logic narratives for process control design and provided input in the preparation of Cause and Effect diagram
• Resolved and incorporated HAZOP, PHA comments into IFD and IFC version of P&IDs
• Prepared documents for the ISO 9000 audit, provided mentorship to the junior engineers and reviewed/approved assigned deliverables produced by junior engineers including process simulation
• Oversee P&ID preparation activity performed by draftsman, knowledge of smart plant P&IDs
• Part of Health, safety and environment team to adhere safety guidelines at workplace

• Newfoundland and Labrador Refinery conversion (NLRC) project
Delayed Coker Unit for NLRC, Placentia Bay(115 KBPSD capacity)
FEED study
• Responsible for hydraulics check of Coker backwarming line under quench mode, Coker Heater inlet and Blowdown Tower overhead line (all critical lines for single/two phase in Blowdown unit using HYSYS/PIPESIM)

• Shell Athabasca Oil Sands Project, Alberta
Hydrogen Manufacturing Unit (8000 NM3/hr)
DETAILED Engineering
• Responsible for Flare header and relief valve tail pipe hydraulics using Aspentech Flarenet process
Simulation tool in accordance with Shell DEP
• Participated in P&ID and HAZOP review meetings for various sections of unit and incorporated comments
from various disciplines
• Involved in hydraulic calculation to deliver LDTs, DPDT diagrams and Electrical Area Classification
packages
• Knowledge for the preparation of Utility flow diagram and Auxiliary P&IDs using vendor package
Drawings

• Reliance Refinery, India
Kero Hydrotreater and Coker Hydrotreater
FEED AND DETAILED Engineering
• Relief load and relief valve sizing calculations using API codes and HYSYS simulation package
• Prepared relief valve datasheet using INTools and PDS software package
• Prepared technical specifications for various equipments and participated in vendor selection meetings
• Flare header and relief valve tail pipe hydraulic calculations for the systems with two phase and vapor only
relief using Aspentech Flarenet simulation version 3.51 and 2004.1
• Prepared equipment datasheets for vessels (two-three phase separator, exchangers and pumps)


July 2003 – Aug 2005 | Research Assistant
University of Western Ontario, London, Ontario
• Research project associated with Sun-Brite Canning Company, Leamington, Ontario
• Successfully conducted treatability study for the treatment of high strength food industry waste and
achieved stringent effluent criteria as per USEPA norms
• Developed innovative biochemical treatment method and contributed research results in Environmental
Bioengineering book chapter
• Developed a strategy for standardizing practices through the development of high-quality SOPs
• Designed, Procured and installed laboratory scale effluent treatment unit
• Commissioned, monitored, trouble shoot, maintained, performance evaluated and data analyzed for
Industrial effluent treatment unit (pilot scale in-situ unit)
• Submitted original research to esteemed journals (Bioresource Technology and Water Environment
Research)

October 1996 – June 2002 | Process Engineer
NIRMA Limited, India. LAB plant Technology supplied by UOP, USA
FEED AND DETAILED Engineering

• Demonstrated strong technical knowledge on processes like high pressure Hydro treating,
Dehydrogenation, Alkylation & high temperature catalytic reforming
• Provided technical support and suggested recommendations to improve plant performance,
communicated cost effective alternatives with technical specialist and technology supplier
• Sole responsibility for the start-up and commissioning of Dehydrogenation section of Linear
Alkyl Benzene plant, activities included
 Developed hydro test and pneumatic test loops, long-short circulation strategy
 Dealt with contractor to oversee construction activities, P&ID and piping layout
 Coordinated heater dry out activities, checked trips and interlocks from process perspective
 Dealt with equipment vendor to match process requirements, equipment dimensions, process and
instrument nozzle orientation and size, specs
 Checked vessel internals and supervise catalyst loading activities in coordination with technology
supplier, Identified sampling points and its frequency to reflect plant performance
• Involved in inspection and precommissioning of modular package units for Hydrogen manufacturing and
Aromatics removal, responsible for the following activities
 Developed P&ID for Naphtha reforming process, technology supplied by Linde, Germany
 Instrument datasheet including control valves and flow orifices, involved in vendor selection meeting
 Relief valve size, type and location determination
 Vessel insulation and tracing requirements
 Close review with Loss Prevention team to identify fire and explosion requirements
• Involved in HAZOP and P&ID review meetings with technical specialist,implemented modifications
• Issued high quality, cost effective alternative design solution with strict adherence to the deadlines
• Part of commissioning/start up team for Cooling Tower (3200 m3/hr circulation) supplied by Paharpur
and DM water treatment plant (600 m3/Day) supplied by M/S Ion- Exchange (I) Ltd
• Carried out pressure survey across critical circuits to identify bottlenecks in the plants, suggested
modifications to debottleneck, enhance productivity
• Analyzed plant reports & worked on trouble shooting to achieve export product quality criteria
• Developed and monitored computerized methods of performing technical calculations on heat and mass
Balance, heater efficiency, MIS reports and laboratory analysis
• Provided input in the preparation of operating manual for olefin and aromatics section of the plant and
worked closely with operating personal to finalize shutdown procedure
• Conducted training sessions for junior engineers, participated in plant safety to achieve zero incident

Education & Certifications:

Professional Engineer of Ontario, Canada PEO 2007
Master’s in Chemical Engineering University of Western Ontario, Canada 2005
Bachelor’s in Chemical Engineering MS University, India 1996
GUS Operation for Process automation TATA Honeywell 1997
UOP Graduate UOP Inc 1997

HYSIS version 3.2
PRO II
ASPENTECH Flarenet version 3.51 and 2004.1
HTRI
API codes 520/521, 610, API 2000
ASME B16.5, Boiler and pressure vessel code; B31.3, for Pressure piping
TEMA
MS Office tools
TDC 3000 GUS System

Fields of Expertise include: Hydraulic calculations, line sizing, pump sizing, safety relief valve sizing, P&ID, PFD and utility flow diagram development, ASME, API Codes, TEMA standards, PPS
Process Knowhow for Delayed Coker, Hydrotreater, Dehydrogenation and its P&ID, PFD development,
Team player, possess good interpersonal skill, self starter, resourceful