Home  Register  Jobs  CVs  Job Search  Worldwide  Process  Help  Search  Scams  JA  B  C
Oil Offshore Marine Careers in Onshore and Offshore Drilling Energy Industry Oil Offshore Marine: Oil & Gas Jobs & CVs Online recruitment services (job vacancies, resume/cv database search) for Oil Industry, Energy, Offshore, Petroleum, Engineering, Construction, Drilling, Subsea, Marine, Shipbuilding, Shipping, Petrochemical. Have your own FREE account! free cv upload registration on Oil-Offshore-Marine.com recruiter benefits: free job postings and cv search on Oil-Offshore-Marine.com
  Need to find something?
 
 Username:  
 Password:  
Oil Offshore Marine Register
 
  Remember my password?  
 Recruiters - Employers & Agencies
  Advertise / Contact Us
free cv upload for all job seekers, free access to oil and gas jobs
subscribe to oil careers alerts, oil jobs postings, drilling rig jobs, engineering jobs

 

CV Piping engineer, 3D modeling of pipes, equipments, DESCON ENGINEERING Abu Dhabi

 
Piping engineer, 3D modeling of pipes, equipments, DESCON ENGINEERING Abu Dhabi

Resume built for oil and gas job opportunities by a jobseeker with experience in Piping engineer, 3D modeling of pipes, equipments, DESCON ENGINEERING Abu Dhabi - would you like to offer this candidate a job/contract employment?

Please contact us OR search for another relevant oil CV/Resume in our impressive oil industry database

CV/Resume ID no.: 93554

Location (Residence): dagupan, Philippines
Citizenship: Philippines
 
Languages:
  Native: English Philippines
  Other: None
 
Education & Experience: Work Authorization & Relocation:
Education:
  Bachelors in mechanical engineering

Years of Experience: 10 years
Authorized to work in:
   Australia
Present Location:
   uae, ruwais
Relocation:
   United Arab Emirates
 
Expertise
Category Subcategory Ability Experience
Engineering Piping Experienced 17 years
Design/Software Piping Experienced 17 years
Engineering Piping Experienced 10 years
 
CV/Resume Details
 
1. Summary (Cover Letter) - CV/Resume Part 1 [Mandatory]

Please accept this letter and the enclosed CV/ resume as an application for employment within your organization. I am graduate in Bachelor of Science in Mechanical Engineering ( BSME ) from the University of Luzon in the City of Dagupan, Province of Pangasinan, Philippines. My commitments and dedication has been successful in previous endeavour and Iím sure I can make a positive contribution towards the growth and overall objectives of your organization.

You will find me to be a very well organized individual with a positive individual and dedicated attitude. I think my personal skills enable me to function in a team environment and perform effectively.

I would be delighted to hear from your office to provide any additional information that you may require and to explore the possibility of employment within your organization. I can be reached out at the hereunder address.

2. Work Experience - CV/Resume Part 2 [Mandatory]

 DESCON ENGINEERING. Abu Dhabi Client: GASCO / ELEIXIER
Design Engineer/ Piping Engineer:- Feb. 2009 to PRESENT
 Prepare the test pack for pressure testing.
 Line inspection before performing pressure testing
 Prepare all the necessary documents such as, cover sheet, table of contents, P&ID with marked pressure test, test system, list of blind and dismantled item, etc.
 Calculate the test pressure and volume of every circuit.
 Prepare the database circuit in Microsoft excel.
 Responsible for all the modification of piping and as built drawing which is required at site.
 Perform site verification to determine interference of new pipe routing with other obstruction.
 Established the number of drawings required for each job, maintaining up-to-date drawing control or register of drawing, charts, graphs, and sketches for current project.
 Design of pipe routing and supports, piping arrangement layout, isometric drawings, material take-off and design check.
 Perform detailed engineering design for piping projects.
 Established the number of drawings required for each job, maintaining up-to-date drawing control or register of drawing, charts, graphs, and sketches for current project.
 Progress monitoring of daily site activities.
 Create 3D models of components and assemblies, photo realistic rendering, verify design and to create technical drawings.

 DESCON ENGINEERING. Abu Dhabi Client: BORUOGE
Design Engineer/ Piping Engineer:- June 2007 to April 2008
 Prepare the test pack for pressure testing.
 Prepare all the necessary documents such as, cover sheet, table of contents, P&ID with marked pressure test, test system, list of blind and dismantled item, etc.
 Calculate the test pressure and volume of every circuit.
 Prepare the database circuit in Microsoft excel.
 Responsible for all the modification and as built drawing of piping which is required at site.
 Perform site verification to determine interference of new pipe routing with other obstruction.
 Established the number of drawings required for each job, maintaining up-to-date drawing control or register of drawing, charts, graphs, and sketches for current project.
 Design of pipe routing and supports, piping arrangement layout, isometric drawings, material take-off and design check.
 Create 3D models of components and assemblies, photo realistic rendering, verify design and to create technical drawings.
 Progress monitoring of daily site activities.
 Collection of daily progress from site.

 PETROSPEC PTE LTD. ( Singapore ) Client: SONGA OFFSHORE
Piping Engineer/ Piping Draftsman:- June 2007 to April 2008
 Responsible for the drawing of all line and as built drawing for the H.P air system for the riser tensioners, motion compensator and also the H.P and low pressure mud system, responsible for the revision of Isometric drawings and design the additional by-pass line.
 Produced detailed drawings from designers or group leaders, schemes or sketches, and made secondary design work, Inspect that the isometric drawings must be correspondent with P&IDís.
 Established the number of drawings required for each job, maintaining up-to-date drawing control or register of drawing, charts, graphs, and sketches for current project.
 Create 3D models of components and assemblies, photo realistic rendering, verify design and to create technical drawings.
 Perform site verification to determine interference of new pipe routing with other obstruction.
 Tracing the H.P and L.P mud existing line and making up all the pertinent drawings.

 WASHI ALUMI CO (Japan) Client: TOYOTA / AISIN
CAD Engineer/ 3D Model:- Feb 2004 to FEB 2007
 Create 3D models of components and assemblies, photo realistic rendering, verify design and to create technical drawings.
 Principles, Operations, Maintenance and Trouble shooting of Die Cast and Press Machine,
 Visually check and verify all the special parts are installed and meet the requirements before start-up.

 JCS Engineering (Philippines) Jan. 2002 to Feb. 2004
Engineer/Draftsman:-
 Secure all the required approvals and permits from the appropriate agency as required.
 Handling land preparation, permits, clearing and construction.
 Responsible for charge and care of the works and shall take every precaution against damage or injury to any part of thereof by the action of the elements or from other cause, whether arising from the execution or from the non-execution of work.
 Responsible for the revision of work and in-charge for the supervision, estimate and compute all the bill of materials, the concrete, masonry, metal reinforcement, lumber, roof materials, tile works, hardware and painting.
 Prepare the complete details of the drawing plan and in-charge for the revision if any.
 Rebuild, repair, and restore and make good all damages to any portion of the works occasioned by any or the above causes before final acceptance.
 Check and verify the revision of work and in-charge for the supervision, estimate and compute all the bill of materials, the concrete, masonry, metal reinforcement, lumber, roof materials, tile work, hardware and painting.
 Prepare all the complete details of the drawing plan and in-charge for the revision if any.
 Create 3D models of components and assemblies, photo realistic rendering, verify design and to create technical drawings for good presentation.

 FORMOSA Petrochemical (Taiwan) May. 1998 to Dec.2001
Mechanical Engineer/CAD Engineer:-
 Responsible for the revision of Isometric drawings and design the additional by-pass line. Inspect that the isometric drawings must be correspondent with P&IDís.
 Check that the line pressure, liquid and virulence gas meet the requirements of the local law.
 Verify that the materials being used are according to class and specification.
 Visually check the welding condition of the line, the temporary welds that should be removed.
 Visually check the control valve, globe, check valve and other special parts are installed according to the flow of direction.
 Check if the requirements of the gravity flow and no-pocket line shown on the drawing (P&IDís) are followed.
 Visually check if the correct special parts are installed before performing hydro-testing and flushing.
 Advice the in-charge to make field adjustments if such installation is not approved shop drawing. Check if the instruments parts are correctly positioned strategically located for maintenance and if there are missing parts. Check support line which is in interference with the extension of another line. Review and check the latest revision of the isometric drawings and technical specification to be utilize in the inspection.

FORMOSA PETROCHEMICAL and REFINERY PLANTS inside battery limits include, HDS, VGO, CDU, HYD, RDS, HRU, and ETC.
 JCS Engineering (Philippines) June. 1996 to May 1998
Engineer/Draftsman:-
 Responsible for charge and care of the works and shall take every precaution against damage or injury to any part of thereof by the action of the elements or from other cause, whether arising from the execution or from the non-execution of work.
 Secure all the required approvals and permits from the appropriate agency as required.
 Handling land preparation, permits, clearing and construction.
 Rebuild, repair, and restore and make good all damages to any portion of the works occasioned by any or the above causes before final acceptance.
 Established the number of drawings required for each job, maintaining up-to-date drawing control or register of drawing, charts, graphs, and sketches for current project.
 Create 3D models of components and assemblies, photo realistic rendering, verify design and to create technical drawings.
 Calculate the load current which is required and according to the electrical code.
 Design and estimate the steel truss.
 Responsible for the revision of work and in-charge for the supervision, estimate and compute all the bill of materials, the concrete, masonry, metal reinforcement, lumber, roof materials, tile works, hardware and painting.
 Prepare the complete details of the drawing plan and in-charge for the revision if any.


3. Education & Training - CV/Resume Part 3 [Mandatory]

Course/Degree School/College/University Year of Passing
BSME (Bachelor of Science in Mechanical Engineering) University of Luzon
Dagupan City, Pangasinan, Philippines 1996
CAD
(Drafting) CAD Vision
Engineering Technologies
Manila, Philippines
1997


4. Computer Skills - CV/Resume Part 4 [Mandatory]
 Autocad
 Microstation
 3Ds max
 Navisworks Jetstream
 P3 Primavera Project planner
 Solid Works
 Smart Draw
 Microsoft office
5. Other Skills - CV/Resume Part 5 [Optional]
3d modeling of piping , equipments , etc
6. Additional Information - CV/Resume Part 6 [Optional]
With the considerable years of experience in mechanical offshore and onshore project construction and commissioning such as Drill ship, Oil Refinery and Petrochemical plants. As a Mechanical piping engineer responsible for acceptance of rejection of material and workmanship shall be qualified. Ascertain that all fabrication and erection by is prepared in accordance with the requirements of the contract documents. Responsible for showing complete details of drawing. Visually inspect and made necessary correction of all deficiencies in materials. Furnished the portion of the contract documents that describes the materials and quality requirements for the product to be fabricated or erected. Interpret drawing, logic ladder diagram, P&IDís and vendor diagrams. Well experience in Piping fabrication and erection, Piping examination and inspection, Flushing and Blowing of Piping, Pressure testing of piping, Heat treatment of piping, Piping support fabrication and installation, Non-destructive and destructive testing. As a CAD Design Engineer responsible for plot plans, Isometric drawings presentation and completeness of finished drawings. Checking and marking vendorís drawing, establishing the number of drawings required for each job, maintaining up-to-date drawing control or register of drawing, charts, graphs, and sketches for each current project. Producing studies and layouts of equipments and piping which must be economic, safe, operable and easily maintained. Making necessary additional calculations for the design. Check and review the latest revision of Isometric drawings and technical specification to be utilize in the inspection. Well knowledge of creating 3D model for piping layout, mechanical equipments, civil and architectural.


 

Questions about this candidate? Contact us for an immediate answer. To find similar people [or more experienced] - active jobseekers, please login OR create, FREE of charge, your own company account.

In order to view this candidate's contact information, you must a) be registered with Oil Offshore Marine - Worldwide Oil & Gas Jobs, and b) have already purchased a subscription.

Login Register Pricing Information
Piping engineer, 3D modeling of pipes, equipments, DESCON ENGINEERING Abu Dhabi
CV/Resume ID no.: 93554

Relevant CVs; view more oil and gas CVs
1. Piping Design Engineer
2. Piping Designer
3. Piping Designer working with Compelmada International, s.a. Portugal
4. PDMS Piping for Oil & Gas Engineering (Offshore, Onshore, EPC Power etc)
5. Piping Superintendent/supervisor/engineer
6. PDS, PlantSpace, PSDS-Bentley, Piping Designer
7. Senior Piping Designer, I aim to be involved in new challenging projects.
8. PDS Piping Designer / Piping Senior Draughtsman
9. PDMS Piping Designer
10. PDS Piping Designer
11. PDS/PDMS Piping / Electrical designer
12. Mechanical Engineer with expertise in Piping & Pressure vessel Design
13. Piping PDS Designer G S Engineering & Construction India EPC - South Korean MNC
14. Lead Structural PDMS Designer
15. Oil & Gas, Petrochemical, Steel Plants
16. PIPING ENGINEER
17. Pipe, Piping, Caesar, Stress Piping
18. Pipe, Piping, Lead Piping, Coating, Insulation
19. PDS Piping Designer
20. Piping Layout Engineer, PDMS
 
 
Other CVs; view more oil and gas CVs
1. structural designer / engineer, Estimator
2. IT professional with about 5 years of experience
3. Electrical installations engineer, Electrical tech, EX electrical inspector, rope access technician
4. WELDING ENGINEER
5. Process Simulation HYSYS, PIPESIM & OLGA. Process : PFDs, PIDs, HAZOP,
6. QC Engineer / QC Supervisor, Welding Inspector
7. Operating Room, ICU nurse
8. Superintendent, Project Manager
9. Deckhand
10. HSE Superintendent
11. Automotive / Air Craft Service Technician
12. Highly Skilled Mechanic
13. Experienced medic with training in emergency and trauma care
14. Career in Electrical and Electronics Engineering
15. Administration Manager, TATA CONSULTANCY SERVICES LIMITED
16. HVAC / DDC Controls Technician
17. Civil construction engineer
18. Experience in the joinery trade - no jobs a challenge to myself
19. Instrument technician Rasgas, Ibnzahr Saudi European Petrochemical Co. SABIC Saudi Arabia
20. Harbour Master and Surveyor, Marine Officer, Master Coasting and Diamond Recovery Vessels
21. Sales associate / former catering banquet director, prep chef, headwaiter, bartender, bar back
22. Instrument Supervisor Ruston Gas Turbine Kuwait Oil Company (K.O.C.)
23. Marine Surveyor, Owner's Representative for Ambuja Cement in Modest Shipyard, Bhavnagar, India
24. Solidworks Designer, AutoCAD (1 year experience) Gowra Technologies Private Limited, Hyderabad India
25. Electrical Supervisor, Electrical and Instrumentation Technician, Ilijan, Batangas City, Philippines
26. Electrical & Instrument Technician Petronas PSR-2 Revamp Melaka Malaysia Domedic Biodiesel Plant
27. Data Operator Credit Processing RPU Industry in India
28. Graduate mechanical engineer with asnt level II in rt ut mt and lt
29. Trainee project engineer Archcon Engineering gas pipeline field, also with Gabriel India Limited
30. Expert Electrical Supervisor Semirara Mining Corp, Teresa Crew Gold Corporation Philippines
 
 

Press Ctrl+D to Bookmark - Tell a Friend - Job Archives - Jobs - Oil and Gas CVs Resumes - Subscribe to Job Alerts - Site Map - Events - Legal - Privacy - Contact

oil offshore marine's website design

Official Blog - International Maritime Signal Flags - Glossary of Oil & Gas Jobs Definitions - Abbreviations & Acronyms from the Oil, Offshore, Marine, and Shipping Industries - Engineering Oil Jobs - Top 100 Energy Sites - Marine Jobs - Offshore Jobs - Oil Careers - Maritime Jobs - PDS/PDMS Oil & Gas Jobs - Oil Industry Jobs - Oil Field Jobs - Oil and Gas Careers - Petroleum Jobs - Oil Rig Jobs - Offshore Oil Rig Jobs - Drilling Jobs - Oil Industry - Official Sitemap - Jobs Feed - Login to your Oil-Offshore-Marine.com account

www.Oil-Offshore-Marine.com - Your Oil & Gas, Offshore, Construction, Shipping, Petrochemical, and Marine Engineering Recruitment Center.

© Oil Offshore Marine - Oil & Gas Jobs - All Rights Reserved.
This website is designed for international users, and its use is governed by Oil Offshore Marine - Oil & Gas Jobs Legal provisions. By browsing on any page of this website, you are deemed to have accepted all Oil Offshore Marine - Worldwide Center of Oil & Gas Jobs legal terms. If you do not agree with Oil Offshore Marine's legal provisions, you must stop using this website and its services.


find oil and gas jobs

  Looking for something?