CV Oil & Gas Inspection Engineer QA QC Toyo Engineering India Ltd.

Resume built for oil and gas job opportunities by a jobseeker with experience in Oil & Gas Inspection Engineer QA QC Toyo Engineering India Ltd. - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 94177
Last Updated: Friday, May 22, 2009

Career Objective
Challenging Project opportunity where I can contribute my talents to a successful team and to further my knowledge in Mechanical Engineering Field for development of organization and self.

Experience Profile: From October 2008 to till date
Working with PMC as Inspection & Expedite Engineer from Aug 2008
Company Name: Toyo Engineering India Ltd.
Project Name: Supermax Project

Job Description

• Approving of Quality Assurance Plan for static equipment, Rotating Equipment and different type of bulk materials
• Coordinate with TPIA(Third Party Inspection Agency) for completion of stage wise inspection of different items.
• Coordinate with Vendor & Client & Expediting of jobs at Vendor Shop.
• Inspection of jobs/Review of MTC at Vendor shop.
• Review of TPIA Inspection Report/Inspection Release Note & Making Despatch Clearance.
• Certify Vendor’s/Third Party Inspection Agencies Invoices for imported and indigenous items.
• Checking & Certify Vendor’s Final Documents.
From May 2008 to September

Working as Inspection Engineer from Aug 2008
Company Name: Halide Petrochemicals Ltd.
Project Name: Supermax Project
Deputed : Insurvey

Job Description

• Verify that correct materials are utilized for related works.
• Be familiar with the applicable Codes, Specification and standards.
• Verify that copies of applicable Quality Control Procedure (where necessary) are available at the work location.
• Verify that all the welding works carried out as per the approved procedure and plans.
• Witness welder qualification test.
• Ensure that the welders are qualified to the WPS.
• Check that welding parameters and verify compliance with approved WPS.
• Receive and review NDT reports.
• Review monthly reports of QC activities.
• Verify that corrective actions are taken in case of non-conformances.
• Verify calibration status of inspection, measuring and testing equipments used.
• Review of approved welding procedure, Qualification records and Welding operators.
• Verify fulfilment of all inspection and test requirements at all the stages as per the QCP and contract requirements.
• Review pertinent records of inspection and test for individual job orders.
• Review of TESTPACK.
• Ensure implementation of HSE policy and HSE plan with in the area of their jurisdiction.
• Participate in HSE activities and when required by the contract manager, site manager or HSE advisor.

2. From May 2007 to April 2008
Working as WELDING INSPECTOR from May 2007
Company Name: CONSOLIDATED CONTRACTOR’S INTERNATIONAL COMPANY Owner: GASCO (Abu Dhabi)
Project Name: Habshan Gas Complex Expansion
CONSULTANT: Flour Middle East

Job Description

• Be familiar with and refer to the applicable Codes, Specification and standards.
• Verification of material are used is correct and as per drawing/Bill of Material.
• Ensure that all the welding works carried out as per the approved procedure and plans.
• Ensure about that approved copies of applicable QC plan (and QC procedures where necessary) are available at the work location (field /Shop).
• Witness welder qualification test in association with the client’s representative and welding engineer.
• Ensure that the welders are qualified to the WPS.
• Check and record welding parameters and verify compliance with approved WPS.
• Monitor welder performance, receive and review NDT reports.
• Prepare monthly welder performance reports.
• Liaise with the work coordinator in case of non-conformances and ensure corrective actions are taken.
• Review of approved welding procedure, Qualification records and Welding operators.
• Liaise with the company representative for the conduct of day-to-day quality related activities of the service contract.
• Ensure fulfilment of all inspection and test requirements at all the stages as per the QCP and contract requirements.
• Compile and review pertinent records of inspection and test for individual job orders.
• Verify calibration status of inspection, measuring and testing equipments used.
• Preparing of TESTPACK.
• Ensure implementation of HSE policy and HSE plan with in the area of their jurisdiction.
• Participate in HSE activities and when required by the contract manager, site manager or HSE advisor.

3. From Feb 2006 to May 2007
Working as PIPING INSPECTOR from Feb 2006
Company Name: CONSOLIDATED CONTRACTOR’S COMPANY (SAUDI ARABIA)
Owner: ARAMCO
Project Name: KHURSANIYAH GAS PROJECT PLANT (KGPP)
Designation: PIPING INSPECTOR
CONSULTANT: BECHTEL TECHNIP JOINT VENTURE (BTJV)

Job Description
 Inspection of incoming materials.
 Fit up & Weld Visual Inspection of pipe joints Steel Structures.
 Dimensional checking of Piping Spool.
 Review of PWHT report & chart.
 Witnessing of Hardness checking
 Preparing test pack & Witnessing of Hydro Testing
 Monitoring of Preheating and Stress reliving of Pipe joints and maintaining records.
 Witnessing of Magnetic Particle & Liquid Penetrate Testing.
 Arrange for Tool Box Meeting for Welders to control repair percentage.
 Witnessing UT (For Lamination) on service line.

4. From October 05 to 26TH JAN 2006
Working as QA/QC ENGINEER from October 2005
Company Name: Reliance Engineering Associated Ltd. (REAL)
Owner: Reliance Industries Ltd. (RIL)
Group: Quality Management Department (QMD)
Project Name: Value Maximization Project (VMP)
Designation: QA/QC Engineer
Deputed: Development Inspection Service

Job Description
 Fit up Inspection of pipe joints, Pipe Supports & Steel Structure
 Weld visual Inspection of related works.
 Witnessing of DPT, MPT, UT
 Witnessing of Hardness checking & Ferrite checking.
 Witnessing of Hydro Testing.
 Witnessing of Pneumatic Testing.
 Inspection of incoming materials.
 Document verification of Test Package.
 Inspection of insulation for piping, vessels & column.

5. From Feb 2005 to Sept’ 05
Company Name: Petron Engineering & Construction Ltd.
Owner: ESSAR OIL REFINERY.
Client Name: ABB LUMMAS CREST MARITUS.
Project Name: CCR/NHT Unit.
Designation: QA/QC Engineer
Inspection: Engineers India Ltd. (as a third party)

Job Description

 Preparation of Welding Procedure Specification (WPS).
 Preparation of Procedure Qualification Record (PQR).
 Witnessing Welder Qualification Test (WQT).
 Qualify of welding Consumables.
 Witnessing of Hardness checking & Ferrite checking.
 Visual Inspection of Fit up of pipe joints.
 Weld visual Inspection of Pipe joints.
 Welder repair percentage analysis and tool box talks for welders to control repair percentage.
 Preparation of Welding Statistics Report.
 Monitoring of Preheating and Stress reliving of Pipe joints and maintaining records.
 Overall loop status register maintaining and follow up for NDT completion.
 Preparation of Line History sheets for weld joints for piping loop.
 Coordination with Client for preparing as built weld map and approval for piping loops.
 Leading a team of Junior Engineers to identify Pipe joints for radiography and coordination for offering to NDT agency.
 Inspection of Pipe Supports.
 Witnessing of Hydro Testing & Pneumatic Testing.

6. From May 2004 to Feb 2005
Working as QA/QC ENGINEER from May 2004.
Company Name: Petron Engineering & Construction Ltd.
Owner: Shell Gas Private Ltd.
Client Name: Hazira Cryogenic Engineering.
Project Name: Hazira Port & LNG Receiving Terminal Project. Hazira. Surat.
Designation: QA/QC Engineer
Job Description

 Fit up visual Inspection of pipe joints.
 Weld visual Inspection of Pipe joints.
 Welder repair percentage analysis and tool box talks for welders to control repair percentage.
 Monitoring of Preheating and Stress reliving of Pipe joints and maintaining records.
 Overall loop status register maintaining and follow up for NDT completion.
 Preparation of Line History sheets for weld joints for piping loop.
 Coordination with Client for preparing as built weld map and approval for piping loops.
 Coordination with construction department for completion of Corrective actions for Non Conformance.
 Leading a team of Junior Engineers to identify Pipe joints for radiography and coordination for offering to NDT agency.

7. From July, 2002 to May, 2004

Company Name: Gopinath Engineering Co. Pvt. Ltd., B.P.C.L., Mumbai
Owner: Bharat Petroleum Corporation Ltd.
Client Name: Engineers India Ltd. as third Party
Project Name: Refineries Modernization Project.
Designation: QA/QC Engineer (Trainee)

Job Description

 Inspection of Fit up, Weld Visual for fabrication of Piping.
 Inspection of liquid penetrant testing and Magnetic Particle testing.
 Inspection of Grit blasting.
 Preparation of inspection reports for the above jobs.
 Witnessing of hydro testing.
 Dimensional check of Fit up
 Job allocation for welders and Junior Engineers and responsible for the Radiography works.

• Familiar with codes and standards
o ASME B 31.3
o ASME SEC V, Sec II Part A, B, C, Sec IX, Sec. VIII
o EIL (Engineers India Limited) Specification
o REAL (Reliance Engineers Association Ltd) Specification
o Aramco (Saudi) Specification
o Atheer (Gasco-Abudhabi) Specification.
o Lurgi & Toyo Specification.

Educational Qualification
• CSWIP 3.1 certified under The Welding Institute, UK
• Diploma in Mechanical Engineering with 72.1% (First Class) from M.I.T UNDER WEST BENGAL STATE COUNCIL OF TECHNICAL EDUCATION West Bengal in June 2002.
Computer Skills
MS-WORD, MS-EXCEL, MS-POWER POINT, MS-OUTLOOK, AUTOCAD
Certification in Non Destructive Testing (NDT)
ASNT Level II in
 Radiography Testing (RT)
 Ultrasonic Testing (UT)
 Magnetic Particle Testing (MPT)
 Liquid Penetrating Testing (LPT)

Computer Skills
MS-WORD, MS-EXCEL, MS-POWER POINT, MS-OUTLOOK, AUTOCAD

• CSWIP 3.1 certified under The Welding Institute, UK
 Radiography Testing (RT)
 Ultrasonic Testing (UT)
 Magnetic Particle Testing (MPT)
 Liquid Penetrating Testing (LPT)