CV Structural/Piping Inspector Keppel FELS Ltd Singapore, TransOcean Semi Submersible Oil Drilling Unit

Resume built for oil and gas job opportunities by a jobseeker with experience in Structural/Piping Inspector Keppel FELS Ltd Singapore, TransOcean Semi Submersible Oil Drilling Unit - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 94247
Last Updated: Sunday, May 24, 2009

Now I am working at KeppelFels as a Senior QA Inspector.Now I am Working Piping Inspection (TransOcean - Semi Submersible Oil Drilling Unit).I would like to work your Organisation.

WORK EXPERIENCE
Company Name : Keppel FELS Ltd, Singapore.
Period : Feb 2008 to till date.
Position : Senior QA Inspector.
Project : B 288 DD Semi Submersible DD III (Oil Drilling Unit)
Client : Trans Ocean

Responsibilities:
 Visual Inspection of Weld Joints (Piping and Structural)
 Radiographic Film Interpretation of Piping and Structural welds
 Ultrasonic Interpretation of Piping and Structural welds
 Monitoring the welders Defect rate closely
 Reviewing of Welding Procedure Specifications (WPS)
 Preparation of Material Traceability Records
 Leading the QA team and solving different issues with respective department
 Witnessing of Valve Testing as per API – 598
 Witnessing for Load Test for Trolley beam and Pad eyes.
 Monitoring Overall Mechanical Completion status and clear for commissioning
 Witnessing for Vacuum Testing and Air Testing
 Co-ordination between Client and ABS Surveyor
 Monitoring the NDT and Inspection status
 Inspection of raw materials and welding consumables as per the requirement.
 Inspection of Structural Fabrication as per Drawing
 Punch list and PCM Monitoring
 Reviewing Dimensional check reports for Panel/Block and Erection Assembly
 Auditing the contractors before the New job commence
 Raising Unscheduled Inspection Reports for different Quality issues
 Verification of inspection test plan and procedures such as NDT procedure
 Interpretation of AWS D1.1 ,ASME B31.3, API-5L and Sec IX and ABS Standard
 Preparation of all related documents and getting approval.

Company Name : Pacific Oriental Pte Ltd, Singapore.
Period : Aug 2007 to Feb 2008.
Position : Welding Inspector.
Project : B 288 DD Semi Submersible DD III (Oil Drilling Unit)
Organisation : Keppel Fels
Client : Global Santafe


Responsibilities

 Stage wise inspection of piping fabrication & erection works with respect to Isometrics and P&I D’s.
 Co-ordinating with Field Engineering Dept for Various Technical Problems & Query’s.
 Took part in QA/QC meetings and discussing quality issues.
 Co-ordinating with Client Inspection & Project Management Team.
 Co-ordination with Field Engineering Dept for Hydro Test & Tie-In Packages preparation.
 Preparation of Quality Documents for Hydro test Packages.
 Monitoring & controlling of Hydro Test Package flow.
 Preparation and verification of Punch List.
 Witnessing Hydro Test activities.
 Witnessing Calibration Activities of Pressure Gauge, Relief Valve and Pressure & Temp Recorders.
 Co-ordinating with Pre commissioning activities.

Company Name : G&L Engineering Pte Ltd, Singapore.
Period : Mar 2005 to July 2007.
Position : Quality Assurance Engineer.

Responsibilities:

 Co-ordinating for QCP & ITP preparation for welding, Mechanical and hydro test activities.
 Inspection of Raw materials & Correlated with Test Certificate, Mechanical Test Witness
 Preparation of Welding Procedure Specifications with respect to Project Material Spec and SEC IX, B 31.3 & B 31.4.
 Witnessing Procedure qualification and Welder qualification tests.
 Surveillance checking of welding activities to prevent non conformance.
 NDT co-ordination. Reviewing RT films and reports.
 Witnessing MPI, PT and PMI activities and reviewing the related reports.
 Lines, Surveillance Inspection of erection activities as per Isometrics and GA drawgs and preparation of as built field Sketches.
 Co-ordinating with Engg dept for the preparation of Hydro test Packages & Flow Chart.
 Preparation of Quality Documents for Hydrotest Package.
 Witnessing Calibration activities of Pressure gauges, Relief valves, Temperature & pressure recorders etc
 Punch list preparation & Witnessing Hydro test.
 Coordination with construction team for Reinstatement.
 Inspection of RTR (Taper / Taper adhesive joints and Lamination joints) Piping.





Company Name : Endela Manufacturing Pte Ltd, Singapore.

Period : July 2001 to Feb 2005.
Position : Quality Control Engineer.

Responsibilities:

 Preparation of quality plan as per code and customer requirement.
 Preparation of WPS with respect to project material spec and codes.
 Arranging procedure and welder performance qualification tests.
 Monitoring Welding and other mechanical works.
 Conducting stage wise inspection during fabrication and erection.
 Involved in gasket verification & monitoring of threaded joints as per ITP & QCP.
 Preparation of Hydro test Procedure.
 Preparation of Hydro test Package.
 Witnessing Calibration activities of Pressure Gauges and Relief Valves.
 Witnessing Hydrostatic test for the completed pipelines
 Co-ordination with construction team for Reinstatement.
 Co-ordinating with third party inspection agency and Clients.
 Coordinating for internal auditing requirements.
 Preparation of daily report.
 Co-ordinating with sub contractors.

Company Name : Aravind Industries, Chennai.

Company Profile : Third party Inspection Company involved mainly in NDT Inspection.
Period : Apr 1997 to July 2001.
Position : Quality Control Engineer

Responsibilities:

 Coordination with Welding Inspectors
 Technical discussions with clients regarding Inspection of pipelines.
 Coordination and Supervision of NDT Projects.
 Ultrasonic and visual Inspection for all types of welded joints.
 Inspection of various structures by using Magnetic Particle Testing.
 Penetrant Testing of weldments.
 Preparation and review of NDT Inspection reports.

EDUCATIONAL QUALIFICATION: Bachelor of Engineering

PROFESSIONAL QUALIFICATION

 AWS – CWI (Certified Welding Inspector)

 Certified ASNT Level II as per SNT-TC-1 (A) in the following methods:

 Radiography Testing
 Ultrasonic Testing
 Magnetic Particle Testing
 Penetrant Testing

COURSES ATTAINED

 Diploma in AUTO CAD.
 Course in Quality Orientation for Shop Operatives.
 Statistical Process Control.
 Microsoft Access 2000.
 Microsoft Excel 2000.
 Web Development with Advanced Java.

 Microsoft Access 2000.
 Microsoft Excel 2000.
 Web Development with Advanced Java.

Technical Skills

 Having knowledge in visual welding inspection.
 Capable to refer relevant Procedures, Standards, Codes and Specifications.
 Capable to witness welding activities based on the approved procedures.