CV Structural Hull Engineer, Malaysia Marine and Heavy Engineering rig, yacht, LNGC/ tanker, container

Resume built for oil and gas job opportunities by a jobseeker with experience in Structural Hull Engineer, Malaysia Marine and Heavy Engineering rig, yacht, LNGC/ tanker, container - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 94428
Last Updated: Thursday, May 28, 2009

I have the honor to apply in your prestigious company for position related in my profession and experiences which you deem appropriate and commensurate to my educational qualification, eligibility, training and work experiences.

And I am current working at Malaysia Marine and Heavy Engineering as Technical Executive- Hull Department.

I am a graduate of Bachelor of Science in Civil Engineering with 2 year experienced in civil works; and more than 5 years experienced on ship repair/ shipbuilding mainly involved steel fabrication, inspection and testing. Application of gap/ fitting and welding provisions as required of Classification Society. Well experienced on repair, fabrication and modification, and erection blocks/panel for of different types of vessel, rig, yacht, LNGC/ tanker, container carrier, car ferry, passenger ship, barge, etc.


TECHNICAL EXECUTIVE
MALAYSIA MARINE AND HEAVY ENGINEERING
MARINE REPAIR DEPARTMENT - HULL
PASIR GUDANG, JOHOR BAHRU
MALAYSIA
July 2008 to present

Detailed Functions

• Coordinate to the in-charge project superintendent/manager to get work specification regarding the project.
• Plan and schedule of works and manpower against the target date of completion.
• Check availability of materials needed in the project considering the date of completion and prepare material take off.
• Prepare SCR (Sub-Contractors Requisition) base on the work scope.
• Prepare IWR (Internal Work Requisition) to other department to prepare necessary facilities needed in the project (scaffolding, welding machines, blower and other related tools & equipments)
• Assist class surveyor for tank inspections to confirm additional job
• Daily inspections of work given to workers (fitting provisions and welding quality prior to the Classification Society Standards.
• Coordinates to other discipline to avoid conflict on work schedule.
• Detailing / measuring works done in preparation to bill
• Control cost of project manpower & minimizing materials and consumables wastages.
• Supervise non-destructive testing such as vacuum testing, hose testing, dye penetrant test, hydrostatic test and air testing.
• Assist surveyor on final inspection of works for acceptance.


TECHNICAL ENGINEER (Structural & Civil)
ADCC JV (AKTOR AL DARWISH CIMOLAI CYBARCO Joint Venture)
NEW DOHA INTERNATIONAL AIRPORT project
DOHA, QATAR
May 2007 to July 2008

Detailed Functions:

• .Prepare procedure/ for structural and civil works in compliance to the project specifications, ITP (Inspection and Test Plan) and Standard Codes ( ATSM, ACI, NFPA, AWS)
• Prepare necessary sketches/drawings for method statement attachment.
• Check on site construction against approved drawings.
• Comply/ incorporate comments done by the consultant to the submitted method statement.
• Check daily submittals as plan prior to cope up with the schedule.
• Analyze risk/ hazards involved on particular for safety compliance
• Reporting to technical office manager


SITE ENGINEER
AL BINAA PROJECTS CONTRACTING & TRADING
DOHA, QATAR
February 2007 to April 2007

Detailed Functions:

• Coordinate to the in-charge project engineer & project manager to get work specification regarding the project.
• Planning and scheduling of manpower and the availability of materials needed in the project considering the date of completion.
• Inspections of work given to workers to check the quality of the works.
• Measuring works done by the contractor in preparation for billing.
• Control cost of project manpower & minimizing materials and consumables wastages.


HULL/ STRUCTURAL ENGINEER
KEPPEL BATANGAS SHIPYARD INC.
BO. SAN MIGUEL, BAUAN, BATANGAS, PHILIPPINES
April 2004 to February 2007 (absorbed from sub-contractor)

Detailed Functions (ship repair):

• Coordinate to the in-charge project superintendent/manager to get work specification regarding the project.
• Planning and scheduling of manpower and the availability of materials needed in the project considering the date of completion.
• Preparing equipment (welding machines, blower and other related tools & equipments)
• Assist class surveyor for tank inspections to confirm additional job
• Daily inspections of work given to workers to check fitting provisions and welding quality prior to the Classification Society Standards.
• Coordinates to other departments to avoid conflict on work schedule.
• Detailing / measuring works done in preparation to bill
• Control cost of project manpower & minimizing materials and consumables wastages
• Perform / conduct non-destructive testing such as vacuum testing, hose testing, dye penetrant test, hydrostatic test and air testing.


MAINTENANCE ENGINEER
SUBIC SHIPYARD & ENGINEERING INC. (A subsidiary of Keppel Group)
CABANGAAN PT., BO. CAWAG SUBIC
ZAMBALES, PHILIPPINES
February 2004 – April 2004 (transfer to Keppel Batangas)

Detailed Functions:

• Planning & scheduling of manpower.
• Daily inspection of yard’s facilities and equipments to ensure that it is in good order and conditions.
• Canvassing & purchase needed spare parts for equipments to ensure that it will not be a cause of delays.
• Involves in continuous development and beautification of the yard premises.
• Preparing inspection & testing records and other supporting papers needed upon undocking signed by both parties.
• Checking bills of finished project of contractors under my supervision.


PROJECT ENGINEER
ROSARIO M. ILAGAN MARINE SERVICES (RMI )
KEPPEL ACCREDITED SUBCONTRACTOR
SAN MIGUEL, BAUAN, BATANGAS, PHILIPPINES
May 2002 – February 2004

Detailed Functions:

• Coordinate w/ the in-charge hull engineer to get information in-relation to the project.
• Planning and scheduling of manpower and checking the availability of materials needed in the project considering the date of completion.
• Preparing hot work permit before the start of the project prior to safety.
• Mobilized materials and consumables to the location where the vessel is to be dry dock.
• Daily inspection of works given to workers for checking of fitting provisions & welding quality prior to Classification Society Standards.
• Detailing / measuring works done in preparation to bill.
• Conduct necessary testing required by the vessel superintendent such as dye penetrant test, vacuum testing, hydrostatic testing, hose testing & air testing.

Aid and Life Support Training
Hamad International Training Center
Doha, Qatar
August 19 – 20, 2007

Permit to Work
ADCC Conference Room
Doha, Qatar
July 18, 2007

Safety Management System for Shipyard
Keppel Shipyard Inc.
Bauan, Batangas, Philippines
November 11, 2004 – November 13, 2004

Computer Literate (Microsoft Project and Microsoft Office)

Ability to organize and prioritize workloads even under pressure
Excellent communication skills (English) - written and spoken
Good interpersonal skills
Good organizational skills
Self- motivated
Ability to work independently and as leader or project team member
Ability to relate to a wide range of people
Providing ideas for improvements
Conducted training on workers for upgrading their skills on:
Basic Welding Theories; Proper Gap Provision for fitting of steel;
Can supervise erection of fabricated panels and blocks.
Safety Oriented