CV Mechanical engineer gas, oil and water design systems

Resume built for oil and gas job opportunities by a jobseeker with experience in Mechanical engineer gas, oil and water design systems - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 95618
Last Updated: Wednesday, June 24, 2009

Master of Science in Mechanical Engineering
9 years experience in the different engineering sector: mechanical and civil works
especially for oil, gas and water system design and installation.
Successfully work on design, projecting, installation, start up, consulting and
service in different engineering sector
Excellent analytical skills and ability to think strategically
Leasing successfully with colleagues, clients and suppliers
Excellent communication skills face to face, on telephone and in writing
Familiarity with working procedures


Key Qualifications:

I have more than 7 years experience in the engineering sector. A feature in my career is that I am experienced significant
stage in gas oil and water treatment, design installation and start-up. Also in measuring industry.
I have a lot of experience as a consultant and project manager in installation of industrial systems and service duty.


Training:

- Several job specialization of engineering
- Project management
- Coaching
- Business economics


Major Projects:

- System for water-gas detection and pressure measuring in
pipe systems
- Flow measuring and data logging in water-gas supply
systems
- 3D modeling of manufacturers product range
- Calculation, design and construction pump station,
hydraulics and pneumatics system in different application
in industry. Automation system. Service duty
- System for continuous supply of water for locations with
restriction water supply
- Gas system constructions, consulting and start up
- Service and support for gear motors
- Main project man for construction and automation
machine systems. Service duty
- Instrumentation equipment for flow and pressure measure
ment. Service duty
- Several installations of system for automatic control pumps
of sewerage stations
- Regulation pressure and flow with frequency converter in
waterworks and heating industry
- Measuring systems for sewage water. Installation on the site

Employment Record

Date:
Location:
Company:
Position:
2003 to date
Novi Sad, Republic of Serbia
INDAS
Project Engineer

Description: - Project Management
- Investment Management
- Technical assistance in sales department of „FESTO“ and
„AZ PNEUMATICA“ pneumatic components.
- Technical assistance in sales department of “Danfoss” instrumentation
equipment
- On the site mounting of „SIEMENS“ and “Danfoss” ultrasonic
flow measuring devices.
- Project of flow measuring test table acc. to ISO 6358.
- Project of installation flow meters in Novi Sad, Niš and
Belgrade waterworks.
- S TART UP heavy gas compressor unit–Banatski Dvor-Serbia
- Design,construction and automation of pump station,
hydraulic and pneumatic system on the site. Consulting
service. Service on the site.
- Design, construction and development machines for food
industry
- Consulting and support for Danfoss flow division
- Consulting service for geared motors Danfoss Bauer
- Consulting and design for different water treatment system
- Consulting service and reconstruction for pump station
system.
Project: Mobile measurement station for leak detection in water
works installations
Location: Germany, SETEC ENGINEERING
Y e ar: 2003
Position: Project manager
Duties: Assistance in engineering design, procurement and project
advisory services, Projecting and prototyping and delivering
of mobile measurement station for measuring of flow and
pressure, with logging and sending data via SMS and
PALM applications.
Date:
Location:
Company:
Position:
2003 to date
Novi Sad, Republic of Serbia
INDAS
Project Engineer
Project: Flow measuring and data logging in water supply
systems
Location: SCG, VIK JKP Beograd
Y e ar: 2004
Position: Project manager
Duties: Project development, technical planning, installation and
service
Project: System for water level measuring and data transmission
via GSM network
Location: SCG, VIK JKP Beograd
Y e ar: 2005
Position: Project manager
Duties: Project development, technical planning, installation and
service
Project: Flow measuring test table acc. to ISO 6358
Location: Italy, AZ PNEUMATICA
Y e ar: 2005
Position: Project manager
Duties: Projecting and prototyping of flow measuring test table for
pneumatics components.
Project: Project, planning and installation system for PRE-OZO
NATION of water –Trailgaz- France
Location: Belgrade waterworks, Serbia.
Y e a r : 2005-2006
Position: Project manager
Duties: Assistance in engineering design, procurement and project
advisory services. Projecting, installation on the site and
supervision the system for preozonation the water system.
Service duty.
Project: System for continuous supply of water for beer factory
Location: Factory Trebjesa- Niksi, Montenegro
Y e ar: 2006
Position: Project manager
Duties: Engineering design, procurement and project advisory
services. Projecting and prototyping and delivering of automatic
system for continuous supply of water with pump
and reservoir. Service duty.
Project: Project, planning and installation system for reconstruction
Belgrade waterworks - “Bele Vode”
Location: Belgrade waterworks.
Y e ar: 2006
Position: Project manager
Duties: Assistance in engineering design, procurement and project
advisory services. Projecting, installation on the site and
supervision the system for send filter fields on the water
treatment system. Leader engineer for pneumatic supply
system, design and construction.
Project: Start-up Heavy Compressor Unit Banatski Dvor- Srbija
Gas Sventa- Russia.
Decription: Caterpillar gas motor engine G36 series with ARIEL Heavy
Duty Balanced Opposed Compressor
Location: Banatski Dvor- Underground gas storage- Serbia
Y e ar: 2006
Position: Project manager
Duties: Project manager and leader engineer for start up heavy compressor
unit. Project adviser and technical assistance, support
and mainervice duty. Service duty
Rehabilitation of urban water supply and sanitation in
Nis and Belgrade-Phase II
Subject of the bid: Supply, delivery and installation of calibration test benches
including accessories for JKP BVK- waterworks Belgrade
Location: Belgrade waterworks, Serbia
Company: SETEC and KfW Bank Frankfurt - EU
Year: 2007
Position: Project manager
Duties: Project of water supply for testing equipment and marking
of water-meters. Required flow ranges are supplied in auto
mation with 10 different pumps. Installation and construction
the pump station with degazator and 3 measurement
machine test benches. Project for all pneumatic system
supply. Service duty.
Project: Project, development and construction of machine for
winding and wetting intestine
Location: Viscofan Koteks- Spain
Y e ar: 2007
Position: Team leader – Engineer
Duties: Projecting and prototyping and delivering of automatic
system for continuous winding and wetting intestine for
food industry. Service duty.
Date: 2008
Location: JKP Kragujevac Serbia
Company: SETEC -EU
Position: Team leader – Engineer
Description: - Project Manager on the site
- Installation all equipment for each pump station
- Automation pumps system according request from tender
- Monitoring and Reporting to SETEC EU
- Analyze databases, formulate the requirements for deliveries

Education:

Institution: Faculty of Technical Science, Department of
Mechanical Engineering, University of Novi Sad, Serbia
Inclusive dates: July, 2003
Degree(s) /Diploma(s) obtained: Master of Science in Mechanical Engineering


Other Qualifications: - Engineer certificate for projecting gas and oil industry
system
- Engineer certificate for installation gas and oil industry
system
- Engineer certificate for projecting water treatment system
- Engineer certificate for installation of water treatment
system

Other Training: - Training of AutoDesk MECHANICAL DESKTOP 4,
„PRINT 93“ computer school, N. Sad, 2000, 2002
- DANFOSS BAUER training for geared motors, Linz,
Austria. Training for DANFOSS BAUER in Esslingen
- FESTO- training for measurement and control system
Stuttgart, Hannover-2006, 2007, 2008
- SIEMENS- training for measurement, regulation and
control system unit 2006, 2007, 2008
- DANFOSS training for instrumentation an flow division,
Serbia 2006 and 2007
- DANFOSS training frequency converter 2006, 2007, 2008
- HazardEX proof training and certification
- Teaching Activity: Courses of „Project Management“,
CPM Belgrade, November 2006, 2007
- Communication engineer-CPM Belgrade 2006,2007,2008
- Solid Works training 2006, 2007, 2008, 2009
- SIEMENS SIMATIC S7 ST PRO-1 2008

- Proficient with MS Office, Windows 98-2000, Windows
XP, Internet Explorer Browser, Auto Cad 2002, 2003, 2006
- AutoDesk Mechanical Desktop 6.0, Working model 4.0,
Matlab and Solid Works

Languages:

Reading Speaking Writing
Serbian < ------ Native ------>
English Excellent Excellent Excellent
German Good Good Good
French Basic Basic Basic