Home  Register  Jobs  CVs  Job Search  Worldwide  Process  Help  Search  Scams  JA  B  C
Oil Offshore Marine Careers in Onshore and Offshore Drilling Energy Industry Oil Offshore Marine: Oil & Gas Jobs & CVs Online recruitment services (job vacancies, resume/cv database search) for Oil Industry, Energy, Offshore, Petroleum, Engineering, Construction, Drilling, Subsea, Marine, Shipbuilding, Shipping, Petrochemical. Have your own FREE account! free cv upload registration on Oil-Offshore-Marine.com recruiter benefits: free job postings and cv search on Oil-Offshore-Marine.com
  Need to find something?
 
 Username:  
 Password:  
Oil Offshore Marine Register
 
  Remember my password?  
 Recruiters - Employers & Agencies
  Advertise / Contact Us
free cv upload for all job seekers, free access to oil and gas jobs
subscribe to oil careers alerts, oil jobs postings, drilling rig jobs, engineering jobs

 

CV Sr QC Engineer coating/insulation, supervisor (marine), project engineer Mohammad Al-mojil Group

 
Sr QC Engineer coating/insulation, supervisor (marine), project engineer Mohammad Al-mojil Group

Resume built for oil and gas job opportunities by a jobseeker with experience in Sr QC Engineer coating/insulation, supervisor (marine), project engineer Mohammad Al-mojil Group - would you like to offer this candidate a job/contract employment?

Please contact us OR search for another relevant oil CV/Resume in our impressive oil industry database

CV/Resume ID no.: 96850

Location (Residence): dammam, Saudi Arabia
Citizenship: Philippines
 
Languages:
  Native: English Philippines
  Other: English
 
Education & Experience: Work Authorization & Relocation:
Education:
  Bachelors in mechanical engineering

Years of Experience: 12 years
Authorized to work in:
   Singapore
Present Location:
   saudi arabia, rabigh
Relocation:
   United States, Qatar, Singapore, United States
 
Expertise
Category Subcategory Ability Experience
Quality (QA/QC) Quality Control Experienced 15 years
Inspection/Expediting Coatings Inspection Experienced 19 years
Inspection/Expediting Coatings Inspection Experienced 1 year
 
CV/Resume Details
 
1. Summary (Cover Letter) - CV/Resume Part 1 [Mandatory]

Dear sir/madam,

Please consider may application for the position that will fit my qualification. I'm a licensed mechanical Engineer. Presently working as a QCI - coating/ insulation here in rabigh steel factory located in rabigh, K.S.A. and it was owned by mohammad al-mojil group (MMG). Please feel free to call me anytime of the day.

2. Work Experience - CV/Resume Part 2 [Mandatory]

1. Company Name : (MMG) RABIGH STEEL FACTORY
Address : P.O. Box 562, Rabigh – 21911, Saudi Arabia
Position Title : Quality Control Inspector (Supervisor) – Coating & Insulation
Date Joined : February 07, 2009 Date Left : Up to the present
Project Name : SAUDI KAYAN 22 & 24 PROJECT (Jubail, K. S. A.)
Project Contractor : Fluor Arabia Ltd.
Project Owner : Saudi Kayan Petrochemical Company

Work Description :

• Monitoring daily painting activities and verifies compliance to approved sandblasting / painting specifications.
• Conduct visual inspection as per approved Inspection and Test Plan (ITP).
• Conduct inspection on all Sandblasting/painting equipment and accessories to verify suitably and safe operation.
• Verify materials and workmanship at the sandblasting & painting area.
• Monitoring of all the painting materials stored in Storage room. Each container of painting materials should be specified the shelf life, batch no. and also storage room condition.
• Monitoring of weather/Ambient condition prior and after Sandblasting works. The process of surface preparation and paint application are all influenced by the weather conditions.
• Conduct visual inspection on substrate condition of the materials prior & after sandblasting.
• The substrate surface area must be free from oil, grease, dirt, loose paint, loose rust, millscale and other contaminants prior to & after sandblasting.
• Determination of right air pressure of the air compressor prior to Sandblasting works using the Hypodermic needle pressure gauge.
• Determination of air cleanliness of the air compressor prior to Sandblasting works using the blotter test method. Clean and dry compressed air that is free of oil and other contaminations must be used for abrasive blasting.
• Check abrasives used for blasting as per approved construction procedure material.
• Determination of surface profile (anchor pattern) after sandblasting using the press-O- Testex tape film & Surface Profile micrometer gauge.
• Check and verify acceptable ambient weather conditions and substrate temperature before and after painting works.
• Conduct visual assessment inspection on the Sandblasted surface area prior to painting application.
• Witness mixing of the paint.
• Determination of Wet Film Thickness (WFT) of on-going painting application to control the proper thickness of the paint applied on the surface.
• Determination of Dry film Thickness (DFT) and visual inspection on appearance of the paint applied on the surface as per approved painting specifications.
• Determination of surface cleanliness between coats prior to next application of the paint.
• Visual inspection of primer, intermediate and Top coat surface condition respectively as per approved painting specification.
• Conduct visual assessment inspection for uniformity, color, hiding power and defects of the paints applied on the surface.
• Raise Request For Inspection (RFI) to our proponents/ PMT for acceptance as per approved Inspection and Test Plan (ITP).
• Prepare daily record and final acceptance documentations.


2. Company Name : (MMG) RABIGH STEEL FACTORY
Address : P.O. Box 562, Rabigh – 21911, Saudi Arabia
Position Title : Quality Control Inspector (Supervisor) – Coating & Insulation
Date Joined : January 17, 2008 Date Left : Dec. 01, 2008
Project Name : IBN – RUSHD PET CONVERSION PROJECT (Petrochem.)
Project Contractor : EPC Engineering Ltd.
Project Owner : Saudi Arabia Basic Industry Co. (SABIC)

Work Description :

• Monitoring daily painting activities and verifies compliance to approved sandblasting / painting specifications.
• Conduct visual inspection as per approved Inspection and Test Plan (ITP).
• Conduct inspection on all Sandblasting/painting equipment and accessories to verify suitably and safe operation.
• Verify materials and workmanship at the sandblasting & painting area.
• Monitoring of all the painting materials stored in Storage room. Each container of painting materials should be specified the shelf life, batch no. and also storage room condition.
• Monitoring of weather/Ambient condition prior and after Sandblasting works. The process of surface preparation and paint application are all influenced by the weather conditions.
• Conduct visual inspection on substrate condition of the materials prior & after sandblasting.
• The substrate surface area must be free from oil, grease, dirt, loose paint, loose rust, millscale and other contaminants prior to & after sandblasting.
• Determination of right air pressure of the air compressor prior to Sandblasting works using the Hypodermic needle pressure gauge.
• Determination of air cleanliness of the air compressor prior to Sandblasting works using the blotter test method. Clean and dry compressed air that is free of oil and other contaminations must be used for abrasive blasting.
• Check abrasives used for blasting as per approved construction procedure material.
• Determination of surface profile (anchor pattern) after sandblasting using the press-O- Testex tape film & Surface Profile micrometer gauge.
• Check and verify acceptable ambient weather conditions and substrate temperature before and after painting works.
• Conduct visual assessment inspection on the Sandblasted surface area prior to painting application.
• Witness mixing of the paint.
• Determination of Wet Film Thickness (WFT) of on-going painting application to control the proper thickness of the paint applied on the surface.
• Determination of Dry film Thickness (DFT) and visual inspection on appearance of the paint applied on the surface as per approved painting specifications.
• Determination of surface cleanliness between coats prior to next application of the paint.
• Visual inspection of primer, intermediate and Top coat surface condition respectively as per approved painting specification.
• Conduct visual assessment inspection for uniformity, color, hiding power and defects of the paints applied on the surface.
• Raise Request For Inspection (RFI) to our proponents/ PMT for acceptance as per approved Inspection and Test Plan (ITP).
• Prepare daily record and final acceptance documentations.


3. Company Name : (MMG) RABIGH STEEL FACTORY
Address : P.O. Box 562, Rabigh – 21911, Saudi Arabia
Position Title : Quality Control Inspector (Supervisor) – Coating & Insulation
Date Joined : January 17, 2008 Date Left : Dec. 01, 2008
Project Name : PC2 – Monomer Project (Mono Ethylene Glycol & Propylene Oxide)
Project Contractor : Mitsui Engineering & Shipbuilding Co. (MESAR)
Project Owner : Saudi Aramco / Petro Rabigh Refining & Petrochemicals Co.

Work Description :

• Monitoring daily painting activities and verifies compliance to approved sandblasting / painting specifications.
• Conduct visual inspection as per approved Inspection and Test Plan (ITP).
• Conduct inspection on all Sandblasting/painting equipment and accessories to verify suitably and safe operation.
• Verify materials and workmanship at the sandblasting & painting area.
• Monitoring of all the painting materials stored in Storage room. Each container of painting materials should be specified the shelf life, batch no. and also storage room condition.
• Monitoring of weather/Ambient condition prior and after Sandblasting works. The process of surface preparation and paint application are all influenced by the weather conditions.
• Conduct visual inspection on substrate condition of the materials prior & after sandblasting.
• The substrate surface area must be free from oil, grease, dirt, loose paint, loose rust, millscale and other contaminants prior to & after sandblasting.
• Determination of right air pressure of the air compressor prior to Sandblasting works using the Hypodermic needle pressure gauge.
• Determination of air cleanliness of the air compressor prior to Sandblasting works using the blotter test method. Clean and dry compressed air that is free of oil and other contaminations must be used for abrasive blasting.
• Check abrasives used for blasting as per approved construction procedure material.
• Determination of surface profile (anchor pattern) after sandblasting using the press-O- Testex tape film & Surface Profile micrometer gauge.
• Check and verify acceptable ambient weather conditions and substrate temperature before and after painting works.
• Conduct visual assessment inspection on the Sandblasted surface area prior to painting application.
• Witness mixing of the paint.
• Determination of Wet Film Thickness (WFT) of on-going painting application to control the proper thickness of the paint applied on the surface.
• Determination of Dry film Thickness (DFT) and visual inspection on appearance of the paint applied on the surface as per approved painting specifications.
• Determination of surface cleanliness between coats prior to next application of the paint.
• Visual inspection of primer, intermediate and Top coat surface condition respectively as per approved painting specification.
• Conduct visual assessment inspection for uniformity, color, hiding power and defects of the paints applied on the surface.
• Raise Request For Inspection (RFI) to our proponents/ PMT for acceptance as per approved Inspection and Test Plan (ITP).
• Prepare daily record and final acceptance documentations.


4. Company Name : MOHAMMAD AL-MOJIL GROUP (MMG)
Address : P.O. Box 11, Dammam – 31411, Saudi Arabia
Telephone No. : 03- 8421111
Position Title : Quality Control Inspector – Coating & Insulation
Date Joined : October 16, 2006 Date Left : Dec. 02, 2007
Project Name : 3rd Expansion Sharq Ethylene / Glycol Petrochemical Project
Project Contractor : Saudi Arabia Samsung Engineering Co. (SSA)
Project Owner : Saudi Arabia Basic Industry Co. (SABIC)

Work Description :
A. (QC inspector @ MMG Laydown yard area)

• Monitoring daily painting activities and verifies compliance to approved sandblasting / painting specifications.
• Conduct visual inspection as per approved Inspection and Test Plan (ITP).
• Conduct inspection on all Sandblasting/painting equipment and accessories to verify suitably and safe operation.
• Verify materials and workmanship at the sandblasting & painting area.
• Monitoring of all the painting materials stored in Storage room. Each container of painting materials should be specified the shelf life, batch no. and also storage room condition.
• Monitoring of weather/Ambient condition prior and after Sandblasting works. The process of surface preparation and paint application are all influenced by the weather conditions.
• Conduct visual inspection on substrate condition of the materials prior & after sandblasting.
• The substrate surface area must be free from oil, grease, dirt, loose paint, loose rust, millscale and other contaminants prior to & after sandblasting.
• Determination of right air pressure of the air compressor prior to Sandblasting works using the Hypodermic needle pressure gauge.
• Determination of air cleanliness of the air compressor prior to Sandblasting works using the blotter test method. Clean and dry compressed air that is free of oil and other contaminations must be used for abrasive blasting.
• Check abrasives used for blasting as per approved construction procedure material.
• Determination of surface profile (anchor pattern) after sandblasting using the press-O- Testex tape film & Surface Profile micrometer gauge.
• Check and verify acceptable ambient weather conditions and substrate temperature before and after painting works.
• Conduct visual assessment inspection on the Sandblasted surface area prior to painting application.
• Witness mixing of the paint.
• Determination of Wet Film Thickness (WFT) of on-going painting application to control the proper thickness of the paint applied on the surface.
• Determination of Dry film Thickness (DFT) and visual inspection on appearance of the paint applied on the surface as per approved painting specifications.
• Determination of surface cleanliness between coats prior to next application of the paint.
• Visual inspection of primer, intermediate and Top coat surface condition respectively as per approved painting specification.
• Conduct visual assessment inspection for uniformity, color, hiding power and defects of the paints applied on the surface.
• Raise Request For Inspection (RFI) to our proponents/ PMT for acceptance as per approved Inspection and Test Plan (ITP).
• Prepare daily record and final acceptance documentations.

B. (QC inspector @ Sharq- SSA- MMG Jobsite)

• Monitoring daily painting activities at the jobsite and verifies compliance to approved painting specifications.
• Conduct visual inspection as per approved Inspection and Test Plan (ITP).
• Verify materials and workmanship at the Jobsite.
• Monitoring of all the painting materials stored in the Storage room. Each container of painting materials should be specified the shelf life, batch no. and also storage room ambient condition.
• Monitoring of weather/Ambient condition prior and after painting works. The process of surface preparation and paint application are all influenced by the weather conditions.
• Visual inspection and monitoring of all test packages subjected for painting works at the jobsite.
• After hydro testing on all test packages involved at jobsite, painting works will follow.
• Conduct visual inspection on the surface preparation using power tools on all weld joints and all damage areas of the pipe spools, equipments, pipe supports, etc. and structural buildings installed at jobsite prior for touch-up repairs and as per test packages involved.
• The substrate surface area must be free from oil, grease, dirt, loose paint, loose rust and other contaminants prior to painting application.
• Witness mixing of the paint.
• Check and verify acceptable ambient weather conditions, substrate temperature before and after painting application.
• Conduct visual assessment inspection for uniformity, color, hiding power and defects of the paints applied on the surface.
• Determination of Wet Film Thickness (WFT) of on-going painting application to control the proper thickness of the paint applied on the surface.
• Determination of Dry film Thickness (DFT) and visual inspection on appearance of the paint applied on the surface as per approved painting specifications.
• Determination of surface cleanliness between coats prior to next application of the paint.
• Visual inspection of primer, intermediate and Top coat surface condition respectively as per approved Painting Specification, Inspection and test plan (ITP) on all test packages involved.
• Raise Request For Inspection (RFI) to our proponents for final acceptance of test packages as per approved Inspection and Test Plan (ITP) and Construction Procedure.
• Prepare daily record and final acceptance documentations.
• Release for insulation after documents acceptance.(depends upon the pipeline).
• Monitoring sub-contractor insulator as per test package release.
• Inspection & acceptance of the insulation with the proponent & owner.


5. Company Name : MAINCOAT, INC.
(exclusive distributor of CHUGOKU MARINE PAINTS)
Address : Warehouse no. 5, Piscor comp., Amang Rodriguez avenue,
Manggahan, Pasig City, Manila, Philippines
Telephone No. : +632- 6419951
Position Title : Technical Service Engineer/ QC Inspector – Painting & Coating
Date Joined : January 2002 Date Left : July 2006

Work Description :

FOR SHIP-REPAIR DRYDOCKING :

• Upon the receipt of notice from ship owner that their ship is due to drydock, the ship’s painting history will already reviewed together with its general understanding reached with the owner and the paint company (MAINCOAT, INC.) as to wether the bottom, boottop and topsides, superstructures, steel decks, cargo holds, cofferdams and voids, engine rooms, masts, booms, ballast tanks, etc. are to be painted.
• Ocular inspection together Owner’s Port Engineer, Shipyard’s Superintendents/ Supervisors, paint company (MAINCOAT, INC.) representative on all areas subject for repair/ sandblasting & painting so that schedule of works and time required will be discussed and agreed.
• All conducted inspection will be based on approved/ conformed written surface preparation and painting procedures/ specifications between the client, shipyard & the paint company (MAINCOAT, INC.).
• Daily coordinate with Shipyards Superintendents, which is the ultimate responsible for completion of the work, presents plans for scheduling the paint program and all other works that may be affected the surface preparation & painting works.
• Monitoring daily surface preparation & painting activities at the Shipyard/ jobsite and verifies compliance to the approved written surface preparation & painting specifications.
• Conduct inspection on all Sandblasting/painting equipment and accessories to verify suitably and safe operation.
• Verify correct paints availability and workmanship of sandblasters & painters.
• Conduct material storage condition monitoring of all the painting materials stored in Storage room. Each container of painting materials should be specified the shelf life, batch no., and storage condition.
• Conduct daily monitoring of weather/Ambient condition prior to Sandblasting works.
• Conduct visual inspection on surface/ substrate prior to and after sandblasting. It should be free from oil, grease and other contaminants.
• Check the quality of the compressed air prior to Sandblasting works. Clean and dry compressed air free of oil, must be used for blasting.
• Check the quality of abrasives used for blasting as per approved written surface preparation & painting specifications.
• Check & verify the acceptable Relative Humidity, Dew point, substrate temperature and air temperature before and after sandblasting.
• Conduct visual ocular inspection on the substrate after Sandblasting works prior to painting application.
• Check and verify again the acceptable Relative Humidity, Dew point, substrate temperature and air temperature before and after of each coating applications.
• Perform Wet Film Thickness (WFT) check before starting the actual painting application to ensure proper thickness of the paint film and to determine how many passes made by the painters prior to proceed to paint.
• Curing of the paints applied must be observed as per Paint Technical Data.
• Perform Dry film Thickness (DFT) check and visual inspection on appearance of the paint applied on the surface as per approved written surface preparation & painting specifications.
• Conduct visual assessment inspection for uniformity, color, hiding power and defects of each paints applied on the surface.
• Ocular inspection with the Owner’s port engineer, Shipyards Superintendents/ Supervisors, paint company (MAINCOAT,INC.) representative every after stage of surface preparation and paint applications.
• Prepare daily or weekly painting report to be submitted to the Owner’s port engineer for signature & acceptance.
• Submit final painting report after completion of the project along with noted variations from specifications, compromises, subsequent failures and photos of the ship/ vessel from drydock to undocking or from start of the surface preparations to painting completions.


6. Company Name : MEGA PAINT AND COATING CORP.
(exclusive distributor of INTERNATIONAL PAINTS)
Address : Santolan Road, Crame, Quezon City, Manila, Philippines
Telephone No. : +632- 6415624
Position Title : Technical Service Engineer/ QC Inspector – Painting & Coating
Date Joined : January 2001 Date Left : December 2001

Work Description :

FOR SHIP-REPAIR DRYDOCKING :

• Upon the receipt of notice from ship owner that their ship is due to drydock, the ship’s painting history will already reviewed together with its general understanding reached with the owner and the paint company (MEGA PAINT & COATING, CORP.) as to wether the bottom, boottop and topsides, superstructures, steel decks, cargo holds, cofferdams and voids, engine rooms, masts, booms, ballast tanks, etc. are to be painted.
• Ocular inspection together Owner’s Port Engineer, Shipyard’s Superintendents/ Supervisors, paint company (MEGA PAINT & COATING, CORP.) representative on all areas subject for repair/ sandblasting & painting so that schedule of works and time required will be discussed and agreed.
• All conducted inspection will be based on approved/ conformed written surface preparation and painting procedures between the client, shipyard & the paint company (MEGA PAINT & COATING, CORP.).
• Daily coordinate with Shipyards Superintendents, which is the ultimate responsible for completion of the work, presents plans for scheduling the paint program and all other works that may be affected the surface preparation & painting works.
• Monitoring daily surface preparation & painting activities at the Shipyard/ jobsite and verifies compliance to the approved written surface preparation & painting specifications.
• Conduct inspection on all Sandblasting/painting equipment and accessories to verify suitably and safe operation.
• Verify correct paints availability and workmanship of sandblasters & painters.
• Conduct material storage condition monitoring of all the painting materials stored in Storage room. Each container of painting materials should be specified the shelf life, batch no., and storage condition.
• Conduct daily monitoring of weather/Ambient condition prior to Sandblasting works.
• Conduct visual inspection on surface/ substrate prior to and after sandblasting. It should be free from oil, grease and other contaminants.
• Check the quality of the compressed air prior to Sandblasting works. Clean and dry compressed air free of oil, must be used for blasting.
• Check the quality of abrasives used for blasting as per approved written surface preparation & painting specifications.
• Check & verify the acceptable Relative Humidity, Dew point, substrate temperature and air temperature before and after sandblasting.
• Conduct visual ocular inspection on the substrate after Sandblasting works prior to painting application.
• Check and verify again the acceptable Relative Humidity, Dew point, substrate temperature and air temperature before and after of each coating applications.
• Perform Wet Film Thickness (WFT) check before starting the actual painting application to ensure proper thickness of the paint film and to determine how many passes made by the painters prior to proceed to paint.
• Curing of the paints applied must be observed as per Paint Technical Data.
• Perform Dry film Thickness (DFT) check and visual inspection on appearance of the paint applied on the surface as per approved written surface preparation & painting specifications.
• Conduct visual assessment inspection for uniformity, color, hiding power and defects of each paints applied on the surface.
• Ocular inspection with the Owner’s port engineer, Shipyards Superintendents/ Supervisors, paint company (MEGA PAINT & COATING, CORP.) representative every after stage of surface preparation and paint applications.
• Prepare daily or weekly painting report to be submitted to the Owner’s port engineer for signature & acceptance.
• Submit final painting report after completion of the project along with noted variations from specifications, compromises, subsequent failures and photos of the ship/ vessel from drydock to undocking or from start of the surface preparations to painting completions.


7. Company Name : PHILIPPINE IRON CONSTRUCTION & MARINE WORKS, INC.
Address : Brgy. Nahalinan, Lower Jasaan, Jasaan, Misamis Oriental,
Mindanao, Philippines
Telephone No. : +638822- 760248
Position Title : Supervisor – Sandblasting and Painting Dept. (Ship Repair division)
Date Joined : June 1997 Date Left : November 1999

Work Description :

• Responsible for planning, scheduling of works and cost estimates for the project.
• Monitoring daily painting activities according to plan & estimates of completion and verifies compliance to project specifications.
• Conduct daily tool box meeting with the sandblasting & painting foremen & workers for safety reasons and other matters concerning the on-going activities.
• Conduct inspection on all Sandblasting/painting equipment and accessories to verify suitably and safe operation.
• Verify paint materials availability and workmanship for each sandblasters & painters.
• Monitoring material storage condition on all the paints stored in the Storage room. “First in, First out” rule must be observed for the paint distribution.
• Monitoring of weather/Ambient condition prior to Sandblasting works.
• Witness inspection on substrate after sandblasting & painting conducted by paint company representative.
• Check the compressor, sandblasting hose, blasting pot, dead man’s handle and its accessories daily prior to Sandblasting. Any damage will be subject for repair or replacement.
• Check abrasives used and availability for blasting as per approved written surface preparation & painting specifications.
• Witness Wet Film Thickness (WFT) check conducted by paint company representative prior to the start of paint application.
• Witness Dry film Thickness (DFT) check.
• Supervise painting foremen & workers for proper implementation of work schedules to meet the target deadline of completion.
• Witness Final inspection with the Owner’s port engineer, paint company representatives.
• Prepare daily record and monitoring of daily activities completion list for every foremen assigned.
• Submit daily production report to the accounting for billing purposes.
• Update daily activities status records constantly of the project.
• Submitted final production report to the accounting dept. for final billing to the owner.


8. Company Name : PHILIPPINE IRON CONSTRUCTION & MARINE WORKS, INC.
Address : Brgy. Nahalinan, Lower Jasaan, Jasaan, Misamis Oriental,
Mindanao, Philippines
Telephone No. : +638822- 760248
Position Title : Project Engineer (Ship repair division)
Date Joined : December 1996 Date Left : June 1997

Work Description :

• Ocular inspection and Survey on the marine vessel or motor ship with the owner’s port engineer, paint company representative, paint superintendent, general foremen after drydocking to verify the areas to be repair and will agree on the work and the time required from start of works to the completion of the project.
• Coordinate with the owner upon the observed repairs through written documents for his confirmations and acceptance.
• Prepares paper work for planning, scheduling & implementation of works, along with cost estimates will be submitted to the owner for approval.
• After approval, Supervise the reading of Ultrasonic gauging to determine the thicknesn area of the existing M.S. Plate prior to crop-out job of thin M.S. plate.
• When the thin area is established, written job orders will be submitted to the owner for acceptance.
• Monitoring works on all crop-out/re-plating works at underwater and above water area of the marine vessel.
• Supervise and monitoring all hot works, sandblasting and painting works from the start of the project until completion.
• Paper works and report prepared every week to be submitted to department heads.
• Conduct ocular and final inspection prior to un-docking of the ship/vessel for acceptance with the Owner’s Representative/Owner, Department Heads, Managers.
• Assists sea trial of the ship prior to turn over to the owner.
• Submitted final billing statement to the accounting dept. for submission to the owner.


9. Company Name : PHILIPPINE IRON CONSTRUCTION & MARINE WORKS, INC.
Address : Brgy. Nahalinan, Lower Jasaan, Jasaan, Misamis Oriental,
Mindanao, Philippines
Telephone No. : +638822- 760248
Position Title : Cadet Cost Engineer
Date Joined : March 1996 Date Left : December 1996

Work Description :

• Conduct project estimates on all materials involved for submittal of biddings.
• Coordinate with the Purchaser Dept. to get the latest prices in the market and or conduct purchasing job direct to the suppliers.
• Make estimates on materials, consumables, labor, etc. for budgetary purposes.
• Submission for checking and approval to the project department head.
• Paper works and report prepared every week to be submitted to department heads.


3. Education & Training - CV/Resume Part 3 [Mandatory]

Educational Background

Highest Education Level : Passed the Mechanical Rating : 72.30%
Engineering Board Examination Year obtained : April 2000
Field of Study (Major): Bachelor of Science in Mechanical Engineering
School : Cagayan de Oro College
Address : Barangay Carmen, Cagayan de Oro City, Mindanao, Philippines
Graduation Date : May 31, 1997

Organization

Phil. Society of Mechanical Engineer - Mandaue City, Cebu - Member-2006 up to the present
Phil. Society of Mechanical Engineer - Mandaue City, Cebu - Auditor - 2004 to 2005
Phil. Society of Mechanical Engineer - Cagayan de Oro City - Member – 2001 up to the present
Singles for Christ - Jasaan,Mis. Or. – Cluster head – 1999 to 2003
Sangguniang Kabataan (SK) - Jasaan, Mis. Or. - SK Councilor - 1994 to 1997


Seminars

SAP software training and applications seminar - MMG(RSF) – May 27, 2009
210 MW Coal fire power plant technology and pollution control-PSME – CDO Chapter – June 17, 2006
Industrial Automation - PSME – Mandaue City, Cebu - March 05, 2005
Energy Savings System - PSME – Mandaue City, Cebu - June 11, 2005
Solid Waste Management - PSME – Balamban, Cebu - August 21, 2004
Cestra Steam System - PSME – Mandaue City, Cebu - Sept. 25, 2004
Personal and Business Development - MAINCOAT, INC. - December 07, 2003
Paint coating Training Seminar - MAINCOAT, INC - March 25, 2002
Paint coating Training Seminar - Mega Paint & Coating Corp. – May 30, 2001
Visual Workplace Management – PSME – Cagayan de Oro City - Sept. 17, 2000.


4. Computer Skills - CV/Resume Part 4 [Mandatory]
• Computer Literate. MS Windows (Word, Excel, Power point, Basic CADD)
• Basic SAP software literate for Project Planning and Quality Management.
5. Other Skills - CV/Resume Part 5 [Optional]
• Driving Vehicle (4-wheel and 2-wheel) with Philippine restriction code no. 1 & 2
6. Additional Information - CV/Resume Part 6 [Optional]
-


 

Questions about this candidate? Contact us for an immediate answer. To find similar people [or more experienced] - active jobseekers, please login OR create, FREE of charge, your own company account.

In order to view this candidate's contact information, you must a) be registered with Oil Offshore Marine - Worldwide Oil & Gas Jobs, and b) have already purchased a subscription.

Login Register Pricing Information
Sr QC Engineer coating/insulation, supervisor (marine), project engineer Mohammad Al-mojil Group
CV/Resume ID no.: 96850

Relevant CVs; view more oil and gas CVs
1. Piping Superintendent/supervisor/engineer
2. Qa/Qc, NDT, Welding Inspection, Integrity
3. CSWIP-AUT Phased Array/SENIOR WELDING/ASNT NDT LEVEL III/LEAD QA/QC INSPECTOR
4. QA/QC, WELDING INSPECTOR
5. Offshore, Pipeline, Topside, Coating
6. QA/QC, welding inspector, NDE engineer, NDE, pipeline
7. QC Inspector (Welding)
8. Electrical Engineer
9. SENIOR WELDING INSPECTOR
10. Lead - Inspection & QC / QA Metallurgy Engineer
11. Pipe, Piping, Lead Piping, Coating, Insulation
12. QA QC
13. Electrical and instrumentation, Project Engineering, maintenance
14. Civil Engineer - Projects
15. Instrument Supervisor
16. Laboratory Technician / Chemist
17. QA/QC Engineer
18. Manager / Sr. Engineering - Projects [electrical]
19. QC Welding Inspector, 17 years, cswip 3.1
20. Pipeline, Piping, Vessels,Tanks & structural field, have over 9 year experiance
 
 
Other CVs; view more oil and gas CVs
1. HSE, Fire Fighting, Instructor
2. BE with MBA with 16 years of vast experience in Marine LPG & Electrical
3. Mechanic, Fitter
4. Deckhand, Roustabout, Assistant, Entry Level
5. Captain, DPO, Mate
6. Qualified Chef looking for offshore work
7. Warehouse senior specialist, storage, transportation
8. Offshore Radio Operator
9. Drilling fluids engineer with ARAMCO Saudi Arabia, Mud engineer
10. Offshore ROV Superintendant / Supervisor, ROV Pilot / Technician
11. Supply Chain Executive, Logistics & Warehouse
12. Rigger, Scaffolder, Crane Driver, Multi-Skilled Operator/Dogman/Scaffolder/Trades Assistant
13. First Officer, Master Mariner, LNG carrier, LPG carrier, Crude carrier and Product carriers
14. PDMS Structural Designer in Aker Solutions Aker Offshore Partners, Bergen, Norway
15. Offshore Rig Medic / Premium Drilling Company Rig - Deep Driller-5 (Cyber Rig)
16. Import Purchase Supervisor, Supply Chain and Logistic Controller
17. HSE OFFSHORE SAFETY OFFICER, IRS, DNV, LRQ, NOBLE DENTON, TUV
18. Helicopter / aircraft service engineer, Bell-UH, Embraer, Cessna, Agusta
19. QC Mechanical Engineer H.K.Al Sadiq & Sons Co for Propane Pumping system upgrade project
20. Production Operator Gas Lift and ESP Harouge Oil Operations in Libya Tripoli - Work permit system
21. Sr Production Operator with Petrogas LLC Oman - gas lift for wells artificial lift method compressor
22. Instrumentation Technician working in KNPC Kuwaint National Petroleum Corporation
23. Petroleum Laboratory Technician / Pipeline Engineer, Fuel Pipeline/Terminal Operation
24. Experienced Project or IT Operations Support Manager, learning Norwegian relocating to Bergen area
25. Senior Piping Design Engineer Doris Engineering Paris France - Offshore, FPSO and Onshore Plants
26. Marine crew member 8 years worked onboard oil & gas carriers vessels
27. Piping Stress Analysis Engineer & Supports Engineer Oil & Gas, CAESAR, CAEPIPE, Smart Plant Review
28. Trainee IT Support Engineer Allied Digital Services Ltd. India Enhanced Software Solutions Pvt. Ltd.
29. Project Coordinator working for FMC Technologies Subsea Systems BP Block 18 Greater Plutonio Angola
30. Instrument Technician with Yokogawa DCS skills in Tongaat Huletts Refinery South Africa
 
 

Press Ctrl+D to Bookmark - Tell a Friend - Job Archives - Jobs - Oil and Gas CVs Resumes - Subscribe to Job Alerts - Site Map - Events - Legal - Privacy - Contact

oil offshore marine's website design

Official Blog - International Maritime Signal Flags - Glossary of Oil & Gas Jobs Definitions - Abbreviations & Acronyms from the Oil, Offshore, Marine, and Shipping Industries - Engineering Oil Jobs - Top 100 Energy Sites - Marine Jobs - Offshore Jobs - Oil Careers - Maritime Jobs - PDS/PDMS Oil & Gas Jobs - Oil Industry Jobs - Oil Field Jobs - Oil and Gas Careers - Petroleum Jobs - Oil Rig Jobs - Offshore Oil Rig Jobs - Drilling Jobs - Oil Industry - Official Sitemap - Jobs Feed - Login to your Oil-Offshore-Marine.com account

www.Oil-Offshore-Marine.com - Your Oil & Gas, Offshore, Construction, Shipping, Petrochemical, and Marine Engineering Recruitment Center.

© Oil Offshore Marine - Oil & Gas Jobs - All Rights Reserved.
This website is designed for international users, and its use is governed by Oil Offshore Marine - Oil & Gas Jobs Legal provisions. By browsing on any page of this website, you are deemed to have accepted all Oil Offshore Marine - Worldwide Center of Oil & Gas Jobs legal terms. If you do not agree with Oil Offshore Marine's legal provisions, you must stop using this website and its services.


find oil and gas jobs

  Looking for something?