CV Lead Piping Designer Linde Engineering India Ltd Petrofac UAE L&T Chiyoda Jacobs H&G Technip

Resume built for oil and gas job opportunities by a jobseeker with experience in Lead Piping Designer Linde Engineering India Ltd Petrofac UAE L&T Chiyoda Jacobs H&G Technip - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 98001
Last Updated: Tuesday, April 27, 2010

Dear Sir,

It was with great interest that I read your recent posting in the website for the position of Chief Designer-Piping. In response, I enclose my resume for your consideration.

I have 24 years exp as a piping designer in filed of Petrochemicals & Oil and Gas processing plants.


Computer Awareness:-
Intergraph’s Plant Design System (PDS)
Isometric Drawing Manager
Drawing Manager for GAD
Pipe Support Designer
Equipment Modelling
MS Dos, windows-XP
Smart Plant Review
Nevis work – 2.2.137
Microstation SE
Design Review
AutoCAD
MS-Office

Highlights of work experience:

• Basic Layout design drafting and piping route study for finalizing the equip. layouts and plot plans
• Piping and equipment 3D modelling in PDS.
• Preparation of under ground composite drawings & U/G piping modelling.
• Physical support modelling in PDS and checked support span as per STD.
• Planning and location of piping stanchions.
• Supports selection and model for the critical & non critical lines and issue to stress.
• Clash checking in SPR / Naviswork
• RDB report check with PMS
• Preparation of special pipe support detail drawings.
• Reviewing of vendor drawings.
• Reviewing of other departments dwgs. /docs. (From Civil, Process, Equipment, Instruments etc.)
• Preparation and finalization of nozzle orientation dwgs. for any equip. with platform arrangements.
• Generation and issuance of piping output and civil information drawings.
• Model review comments upgration.
• Preparation of P&ID and Piping MTO.
• Preparation of piping isometrics and GADs for IFC.
• Helping other designers in extracting the isometrics for IFC in order to achieve the milestone dates.
• Preparation of piping MTO for proposal engg.
• Preparation of as built drawings and site study sketches for Tie-in connection points.


Experience in Detail

• Period : April 2008 to till day
Name of Organisation : Linde Engineering India Ltd, India.
Designation : Chief Designer – Piping
Proposal Engineering
1) Gas Fractionation units of Integrated Gas Development Project for Abu Dhabi Gas Industries Ltd. (GASCO) Ruwais 4th NGL Train, Ruwais. UAE.
Detailed MTO of PIPE RACK for Fractionation unit part-A and Deethanizer Overhead Treater Unit Part-B

Project Handled
1) Presently I am working as a Lead designer of Polymerisation unit for Polypropylene plant (500 TPY capacity) , JSC Sibur Holding, Tobolsk Polymer, LLC. Tobolsk, Russia
2) Wash water system and Dosing units for Abu Dhabi Polymers Company, Borouge, Ruwais-2 UAE. PDS 3D modelling of equipment and piping for Quench tower, pipe rack, dosing units,

• Period : June 2006 to March 2008
Name of Organisation : Technip, P.O.Box 7657, Abu Dhabi, UAE.
Designation : Sr.Piping Designer
Project Handled
Worked as a Lead Designer and PDS 3D modelling of equipment and piping for Merichem unit, Pipe Rack and Pressure letdown station area of Ras Gas onshore expansion project phase-2 for Ras Laffin Liquefied Natural Gas Co. Ltd. Qatar. (Ras Gas)

• Period : March 2005 to June 2006
Name of Organisation : Petrofac International Limited
Sharjah, UAE
Designation : Sr.Piping Designer
Project Handled
Worked as a Sr. Piping Designer of Oil treatment and Gas processing unit for Kashagan Development experimental programme for AGIP Kazakhstan Caspian operation company (Agip KCO) Kazakhstan, Russia.


• Period : Sept.-2004 to March-2005
Name of Organisation : Jacobs H&G Limited
(A subsidiary Jacobs Engg. Group Inc USA) Baroda.

Designation : Sr.Piping Designer
Project Handled
1) Low sulphur Gasoline unit of Conoco Phillips, Alliance Refinery, Balle Chase, USA,
2) C3-C4 Dehydration unit and LPG Mercaptane unit of Kashagan Development experimental programme for AGIP Kazakhstan Caspian operation company (Agip KCO) Kazakhstan, Russia
3) Tanker filling station (Formic acid loading area) of Gujarat NarmadaVAlley Fertilizer Co. (GNFC) Bharuch, India.

• Period : May-2000 to Sept. 2004
Name of Organisation : L&T Chiyoda Ltd, Baroda, India
A joint venture company between Larsen & Toubro, India (A leading Indian EPC company and chiyoda corporation, Japan) having global benchmark in Refinery & petrochemical sector. Baroda. India
Designation : Sr.Piping Designer
Project Handled
1) SDU (solvent De-waxing/De-oiling unit) Indian Oil Corporation Ltd; Degboi Refinery, Assam.
2) Utility service system for R&D centre of Indian Oil Corporation Ltd; Faridabad.
3) Naphtha Hydrotreater and Catalytic reforming unit of Chennai Petroleum Corporation Ltd; CPCL Refinery, Chennai
4) C2, C3 Compressor area of Thai Olefins plant expansion project (Ethylene processing unit II) for Thai Olefins Co, Ltd. Thailand.
5) Tank farm area of Pipeline Marketing Terminal IOCL, Navagam, Gujarat Refinery, India.
6) Sour Water Stripper unit of DHDT/MSQ upgration project of IOCL, Mathura Refinery.

Proposal Engineering
1) RHDS (RDS plant), Indian Oil Corporation Ltd, Gujarat Refinery, Vadodara.
2) Kerosene Prefractional unit of Chinese Petroleum Corporation, Talin Refinery, Taiwan
3) New HP Injection Compressor area and New Nitrogen Generator Skid for Saudi Arabian Oil Co, Saudi Arabia
• Period : June 1996 to May 2000
Name of Organisation : Engineers India Ltd (R.O. Vadodara)
A Govt of India Undertaking. Deputation through Lark Engg. Services Baroda. India.
Designation : Sr.Piping Designer
Project Handled
1) IOP PH-I and PH-II of Indian Petrochemical Corporation limited (IPCL) Gandhar. Dahej.
2) Crude Distillation unit (CDU) of Indian Oil Corporation Ltd, Gujarat Refinery,
3) Amine Regeneration unit and Amine Absorption unit of IOCL, Gujarat Refinery, Baroda.
4) LPG Plant of Gas Processing Complex for Gas Authority of India Ltd., Gandhar, Dahej.
5) Hook up of safety valve discharge to Flare Header system of IPCL, Baroda.
6) Enabling jobs for RDS project of IOCL, Gujarat Refinery, Baroda.

• Period : August-1985 to June-1996
Name of Organisation : Lark Engineering Services
Baroda. India.
Designation : Jr.Piping Draftsman
Responsible for Preparation of as built drawing, Vessel Trims, modification of piping layout, piping isometrics with bill of materials.

New SSC exam passed in 1983 March
diploma Mechanical Draftsmanship exam passed in July 1985
AutoCAD cert course passed in 1996

Objective: - To obtain a position as Chief Designer - Piping that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Summary of Experience :- Over all 24 Yrs. Professional Experience in Design, Detail engineering for process piping with different assignment in Petrochemical, Refineries, Oil and Gas processing plants.

Qualifications:
Sr.
No. School/Name of institute Degree/Cert. Year of Passing % Obtained
1 Shri M. H. Dayaram
Sharda Mandir High School New S.S.C. March-1983 50%
2 G. K. J. S. Tech. Institute
(I. T. I) Govt. of Gujarat Draughtsman
Mechanical July- 1985 70%
3 Vijay Computer Academy AutoCAD April- 1996 First Class

Intergraph’s Plant Design System (PDS)
Isometric Drawing Manager
Drawing Manager for GAD
Pipe Support Designer
Equipment Modelling
MS Dos, windows-XP
Smart Plant Review
Nevis work – 2.2.137
Microstation SE
Design Review
AutoCAD
MS-Office

-