CV Rig Electrician Offshore Electrical Technician Petra Energy Sdn Bhd Offshore Crane Maintenance Serv

Resume built for oil and gas job opportunities by a jobseeker with experience in Rig Electrician Offshore Electrical Technician Petra Energy Sdn Bhd Offshore Crane Maintenance Serv - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 98033
Last Updated: Friday, October 15, 2010

Dear Sir/Mdm,

SUB: Application for Rig Electrician

I am Pleased to inform you of my keen interest on the above position.

Previously, I am working as a Senior Electrical Technicians cum Robway Crane SLI Technicians with Brunel-Energy & Petra Resources which dealing in an Offshore Crane Maintenance and Specialist Services Company. I have been 6 years experiences working in oil & gas industry.

My roles in the company are wide ranges as shown in my CV attached. I believe with my current experiences, I can contribute effectively to your organization.

WORKING EXPERIENCES

Petra Energy Sdn Bhd Offshore Crane Maintenance Services for SSB/SSPC/PCSB. (2006-present)

1. As a SENIOR ELECTRICAL TECHNICIANS CUM ROBWAY CRANE SLI TECH.

2. Duty to carry out Inspection & Preventive Maintenance of Electrical & Instrumentation for all Offshore Pedestal Cranes & Overhead Electric Cranes such as KONECRANES, STAHL etcs.

3. As an Authorized Robway Personnel to carry out alls the installations, calibration, testing &
commissioning of the Robway Load Indicator Systems equipments.

4. To carry out visually inspection & performing Crane Proof Load Test as per require.

5. Familiar with the Offshore Pedestal Crane model such as Favelle Favco, Seacrane, Weatherford,
American Aero crane & Overhead Cranes etc.

6. To carry out installation & inspection of electrical equipments such as boom floodlight, beacon light, fluorescent Light, limit switches, crane load instrumentation etc. maintain as necessary.

Brunel-Energy (M) Sdn Bhd (Offshore Crane Maintenance Contractor for SSB/PCSB (2004-2006)

1. As a SENIOR CRANE ELECTRICAL TECHNICIANS CUM ROBWAY SLI SYSTEM
TECHNICIANS (2004 – 2006)

2. Scope of works to carry out alls the Offshore Crane electrical maintenance PM/CM including the SLI /
Robway Crane Safety Systems.

3. To carry out Crane Electrical & Instrumentation inspection as per require. (3 M/ 6 M / 12 M / 24 M).

4. As an Authorized Robway Personnel to carry out alls the installations, calibration, testing &
commissioning of the Robway Load Indicator Systems.

5. To perform Crane Load test for Pedestal Crane, Jib Crane, Gantry Crane, Lifeboat & Calibrating
the Robway Load Indicator Systems.

6. Familiar with the Offshore Crane Model such as Favelle Favco, Weatherford, Bucyrie-Erie,
Skagit, Demag etc.

7. Familiar with the Crane SLI / Robway Indicator Systems such as RCI-4000IS Tension-Based
System / Load Moment-Based System. (Favelle Favco, Seacrane, Unit Mariner, Busyrie Erie,
Weatherford etcs.
8. Has attended the service training course for ROBWAY CRANE SAFETY SYSTEMS in
Adelaide, Australia. ROBWAY Competence Certificate

BJ OILWELL SERVICES (M) SDN BHD

1. As an Equipment Operator Technician cum Electricians. (2003-2004)

2. Scope of work to carry out maintenance activity for alls BJ equipment in offshore & onshore. Offshore
Crew Team for Acidizing, cementing & coil tubing projects.

3. To monitor & operate the well service equipment tool and machine during the acidizing job activity.


4. Has been involved in the Completion of the Acidizing Project at SJJT-G North Sabah Operation
Sabah Shell Petroleum Company (SSPC) in 2004 with comply the ISO standard by implement
Safety to achieve the HSE target.

5. Has attended the Technical Skills Training & Work Safety Training including the chemical handling
procedure at the BJ International Training Centre (Asia-Pacific Region) in Batam Island, Indonesia.


KEJURUTERAAN RASSHIN SDN BHD/ DUNIALAM RESOURCES SDN BHD
Contractor Class A/Turnkey Contractor (2002-2003)

1. As a Site Engineer cum Site Supervisor for several major engineering construction projects under
Electrical, Mechanical & Civil work.

2. Scope of work to assist in Technical Planning & Coordinating, Site-Management and Engineering
Design of work programming schedule to achieve the project target with comply the ISO standard &
Codes requirement by implement the safety of work under the act of OSHA.


Project involved

1. To supply, deliver, installation, testing & commissioning of the new package Boiler Project at
PETRONAS METHANOL (LABUAN) SDN BHD. (Mainhead C-Civil Work)
Project Duration: 12 month
Project Value: RM1,388,000,00

2. To design, build, testing & commissioning the 2 Blocks of 3 & 4 Storey Quarters Class ‘G’ for
Marine Department of Sarawak at Kuala Baram.
Project Duration: 12 month
Project Value: RM 4,500,000,00


FABER MEDI-SERVE SDN BHD / PROPEL-JOHNSON CONTROL SDN BHD
Kapit Hospital Support Service Contractor (2001-2002)

1. As an Electrical Technician / Instrument Technician (Contract Basis).

2. Scope of work to assist electrical support service & to carry out all the preventive maintenance &
corrective maintenance for alls the electrical & electronic equipment in the Hospital.

3. To carry out Electrical Troubleshooting in the interface circuit of electrical & electronic devices.

4. To assist routine/daily inspection activity to checked and to setup the instrument equipment
such as MSSB/DB, Air-Compressor, Gen-set, UPS System Unit, Gas Distribution System Unit,
Fire Fighting Control Panel Unit, Air-valve & Pressure Unit etc.

5. To carry out maintenance & service of Computer, Communication & PABX System Unit,
Facsimile, Photostat Copier Machine etc.


MEMORY TECH SDN BHD
(Jln SS13, Subang Jaya, K.L)


1. As a Production / Process Technicians in the CD-R Production Company. (2001)

2. Scope of work to assist production line to achieve the output target and to upgrade existing setup
to achieve ISO 9001 Standard in manufacturing industry and Maintaining the ISO Certification.

3. Familiar with Hi-Tech Digital Printing Machine Process to design and to setup the programming of
the CD-R Production process.

EDUCATION BACKGROUND
Highest Education

Institution: British-Malaysia Institute (Kuala-Lumpur Campus)
Qualification: HND BTEC UK in Electrical & Electronic Engineering
Grade: CGPA 2.2 out of 4.0

Other Qualifications

Institution: Institute Of Skills & Vocational MARA (IKM Kuching)
Qualification: Certificate of Technology in Electrical Engineering
Grade: CGPA 2.91 out of 4.0
Institute: Kapit Secondary School (SMK Kapit)
Qualification: MCE/SPM (Sijil Pelajaran Malaysia)
Grade: 3 (Pass with Oral)

SKILLS, STRENGHT & COURSE ATTENDED

Personal Strengths

1.Competent of Wireman PW2 from JBEG.
2.Competent of Wireman Grade-2 from SESCO (Sarawak Electric Supply Co.)
3.CIDB Safety Training: CW (10) Civil Work & EW (10) Electrical Works.
4.Certificate of Competence in Sea Survivor & Offshore Safety Procedures, Helicopter Underwater Escape Training & Basic Fire Fighting (with EBS) & Self-Rescue at SMTC (Miri). Expiry date: 05/03/2010.
5.Certificate of Competence in Hydrogen Sulphide Safety Course (H2S) Certificate No: A17.04.0223. Expiry date: 01/12/2009.
6.Certificate of Attendance in Service Training Course conducted by Robway Crane Safety Systems in Australia, covering the following modules:
RCI-4000IS Tension-Based System for Offshore Crane Application
(Hazardous Areas)
RCI-4000IS Load Moment-Based Systems for Offshore Crane Application
(Hazardous Areas)
Systems Installation, Calibration and Commissioning.
Troubleshooting Procedures.
Data Logging of RCI-4000IS Systems
Overview of RHL-1000 Hydraulic Load Indication System.
Overview of RCI-1550 Winch Monitoring System.

7.PERMIT TO WORK SYSTEM COURSE for SHELL EP– at SMTC Training Centre (MIRI).
- Competence of PTW Applicant. (Expiry date: 21 SEPT 2009)

8. PERMIT TO WORK APPLICANT COURSE for Petronas Carigali. (Expired date: 2011)

9. WIRE ROPE INSPECTION COURSE- Conducted by BRIDON
INTERNATIONAL & CROSSBY GROUP INC.

10. HYDRAULIC HOSE SAFETY & PREVENTIVE MAINTENANCE COURSE- Conducted by
BRIDGESTONE INTERNASIONAL LTD.(SINGAPORE).


Language Proficiencies
1. English Language (Good – Read & Writen)
2. Bahasa Malaysia Language (Good –Read & Writen)

Industrial Training

Company: HATALETRO SDN BHD (Kuala Lumpur Project)
Title: In-plant training in Electrical Construction Industry.
Level: Skills Practical Training for Electricians/Wireman/Chargeman
Specialization: Installations, Maintenance, Wiring single phase & 3-phase, Underground Cable,
Overhead Line Cable, Troubleshooting interface circuit, Fitting, Testing &
Commissioning.
Date Joined 05 January 1998.
Date Left: 30 June 1998.
Dur. Training: 6 Month (In-plant training)

Additional Skills and Knowledge

1. Computer Programming: TURBO PASCAL, BORLAND C++, VISUAL BASIC 6.0

2. Computer Software: ELECTRONIC WORKBENCH, PCB PROTEL, MATLAB, PALASM,
PIC MICROCONTROLLER, PLC, AUTO CAD LT.

3. Microsoft Office 2000: WORD, EXCELL, POWERPOINT.

4. Microsoft Project 98 & 2000.

5. Basic computer maintenance & installation.

nil