CV DCS control systems engineer and Safety system engineer works in TOTAL Exploration in Yemen

Resume built for oil and gas job opportunities by a jobseeker with experience in DCS control systems engineer and Safety system engineer works in TOTAL Exploration in Yemen - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 98675
Last Updated: Tuesday, August 25, 2009

Dear Sir

As you can see from the following items that my experiences and skills as following
• Systems Engineer with excellent interpersonal, written and oral communication skills as well as strong planning and organizational skills.
• Experience in process control systems, involving design and integration.
• Remarkable skills in commissioning and starting up process control Projects.
• Applicable experience in the design, construction and operation of SCADA systems, DCS and Human-Machine Interface designs.
• Develop & maintain Control SW & HW for industrial/Oil & Gas plants and relevant auxiliaries.
• Issue and manage control systems documentation.
• Attend technical meetings with Customers, witness Panel testing and provide support to Test and Field Service departments.
• Able to work separately as well as a team member.

Details of Work Experience:
Client: TOTAL Exploration in Yemen (TEPY) (Yemen)
YOKOGAWA middle east- Total
From 05/2009 to till present
Position: DCS and Safety system engineer

-SAT activities, start up and commissioning of DCS of YOKOGAWA centum 3.8 for new PEC gas export project
-SAT activities, start up and commissioning of safety plc PROSAFE RS 2.2 of YOKOGAWA for new PEC gas export project
-loop checking of field instruments to new systems
- making the new engineering of the subsystems communication to DCS system of MODBUS,
- supporting function test of the process units 
-New modification in engineering and the graphics of the new unit to reflect in CCU unit by applying the new logics according to engineering specs.

Client: RAS LAFAN olefin project (RLOC) (Qatar)
YOKOGAWA middle east- TECHNIP France
From 02/2009 to till 05/2009
Position: DCS system engineer
-SAT activities, start up and commissioning of DCS of YOKOGAWA centum 3.8 (33 FCS)
-Modification in engineering and the graphics of the system and system typical by applying the new logics according to engineering specs.
-loop checking of field instruments which is foundation field bus devices or hart devices
- making the new engineering of the subsystems communication to DCS system of MODBUS, OPC communication systems (EXA OPC)
- supporting function test of the process units 

Client: Spanish Egyptian company for liquefied gas (SEGAS)
From 05/2008 till present
Position: resident DCS and safety systems engineer of Yokogawa co.

Responsible of all DCS system (YOKOGAWA CS3000) and ESD (safety system pro safe PLC) for both F&G and SIS systems, OPC servers and Mulcom stations and PRM stations
Our scope is:
1- To make overall revision of system component status and make maintenance reports and required analysis to check system performance to get proper operation
2- Performing all needed modifications and new engineering for system software and its related hardware changes required form client
3- Make routine backups for systems database


Client: Egyptian Sugar Company
From 3/2008 to 5/2008
Position: project engineer

Hawamdia Distillation factory in Cairo
- SAT activities, commissioning and start up of distillation unit using Schneider premium PLC and Monitor PRO SCADA systems to implement the required sequence, controlling and monitoring actions
- commissioning and Start up of the of YOKOGAWA controllers of type US1000, DX100,DX200 recorders that were used to backup SCADA and PLC system incase of shutdowns
- Preparing as built documents of the project.


Client: Nobaria for sugar co.
From 1/2008 to 3/2008
Position: DCS system engineer

- SAT activities, start up and commissioning of DCS of YOKOGAWA centum 3000
- Modification in engineering and the graphics of the system
- Start up of the field instruments which is foundation field bus devices
- making the new engineering of the subsystems communication to DCS system of MODBUS, PROFIBUS SYSTEMS


Client: Nasr for Fertilizers Company
From 12/2007to 1/2008
Position: DCS system engineer

- Preparing new engineering in DCS YOKOGAWA system so as to control new added production lines
- Preparing new logic and sequences that will be used according to the client specs
- Implementing and applying all the previous in DCS system
- Commissioning and start up of the previous of the new DCS system
- Preparing the as built document of new DCS system.


Client: trust chemical company
From 10/2007 to 11/2007
Position: DCS system engineer

- Preparing new engineering, wiring diagram and loop drawings and all the required documents to add new FCS and its I/O modules in DCS YOKOGAWA system so as to control new added production lines
Preparing new logic and sequences that will be used according to the client specs
- Implementing and applying all the previous in DCS system
- Commissioning and start up of the previous of the new DCS system
- Preparing the as built document of new DCS system.


Client: Abou Korkas sugar company
From 07/2007 to 09/2007
Position: PLC and SCADA engineer

- SAT activities, commissioning and start up of water treatment station using Schneider premium PLC and Monitor PRO SCADA systems to implement the required sequence, controlling and monitoring actins
- Start up of the field instrument and actuators of YOKOGAWA types such as differential pressure, conductivity, vortex flow meters, and control valves
- Preparing as built documents of the project.


Client: Helwan military factory.
From 5/2007 to 6/2007
Position: project engineer
Duties: Draeger Fixed Gas Leak detection system


 Site survey to upgrade gas detection system of gas called Cyclopentane Using the Dragger systems
 Preparing all engineering document and wiring diagrams
 Installation of the new system
 Start up and commissioning of the system
 Giving the client maintenance and operation training

Client: Assuit oil and Refinery Company
From 2/2007 to 4/2007
Position: PLC system engineer
Duties:

Star up and commissioning of the heater control system which was made using the Schneider PLC and HMI Using the warm stand by technology of PLC
 Adding new connection of the DCS system through MODBUS communication

Client: SEGAS (Liquefied natural gas plant)
From 11/2006 to 2/2007
Projects:
• Propane import line
• Position : DCS system engineer
• Duties :

 Installation of the field instrument of the Propane import line
 Adding the this new line to DCS and ESD systems
 Changing the DCS graphics and adding new control drawings
 Start up and commissioning of the instrument and the DCS

• Diesel instrument air compressors
• Position: DCS system engineer
• Duties :

 Adding the new wiring of the analogue and digital and MODBUS communication signals of the new diesel compressors to be connected to DCS system cabinets
 Configuration of and preparing of I/O and the mapping list of the MODBUS serial communication
 Adding the new graphics of the new compressors in the DCS system
 Preparing all the engineering documents ,also I made the site survey of that system
 Start up and commissioning of new hardware and software
Client: Nasr petroleum co
From 6/2006 to 11/2006
Position: DCS system engineer
Duties:
SAT activities, start up and commissioning of DCS of YOKOGAWA centum 3000 of the crude distillation oil unit 3
 Modification of the of the system and marshaling panels and so in the loop drawings and wiring diagrams
 Modification in engineering and the graphics of the system
 Start up of the Schneider PLC with its HMI
 Instructing the client in the operation and engineering training course
 Preparing as built document of the system.

Client: Kom Ombo Sugar Company. For sugar and integrated industries
From 2/2006 to 5/2006
Position: DCS system engineer
Duties:

 SAT activities, startup and commissioning of the of the DCS of YOKOGAWA centum 3000 and Field instruments

Client: Nestlé' Company
From 1/2006 to 2/2006
Position: project engineer
Project: Draeger Fixed Gas Leak detection system
Duties:
 Start up and commissioning of Draeger Ammonia gas Leak detection systems in Nestlé factory plant
 Preparing all loop drawings and wiring diagrams
 Instructing training course in the operation of the systems and maintenance.

1/2005 - 1/2006
Helwan Fertilizers Company
Cairo.
Electrical and automation engineer.

During the construction and commissioning phase.
Responsible of following up the installation and testing of the following items

- DCS and ESD systems of ABB Adavnt OCS systems with
1- Advant control builder A as engineering tools consists of Application Builder (APB), Function Chart Builder (FCB), Bus Configuration Builder (BCB) and the option On-line Builder (ONB) and the library AMPL PC and DB Element Libraries. For controllers programming
2- Rack and remote I/O S600
3- Controllers series (AC 450,110) and ESD controllers (safe guard 400 series) which is SIL 2 certified system

- Field instruments installation and commissioning of the Ammonia, Urea .bagging station and Utilities
- Compressor house and turbines room and its control systems
Responsible of power stations starting from
66 KV GIS power station then 66 /6.6 KV transformers synchronized with
Medium voltage generator 6.6 KV driven by turbine
Medium voltage 6.6 KV station (transformers 6.6 / 0.42 KV and medium motors panels)
Low tension feeding panels
MCC panels

Training courses:

During that period I have got training on such systems in Abou-KIR fertilizers company training center.


1/2003 - 1/2005
Citro Misr for citric acid production.
10th of Ramadan city.
Automation and instrumentation maintenance engineer.


-Observing all the control systems and instruments of transmitters, actuators, plc's and SCADA in the plant of the following control systems
Siemens S7 PLC
Schneider PLC
-Solving and troubleshooting all the problems of the plant control and instrument systems.
-Reporting all my remarks to mangers of the plant
-Contributing in the predictive and preventive maintenance of the plant systems and instruments.
- DCS YoKogawa centum 3000 maintenance and configurations and following up of its status.
- follow up the status of all F&G systems in the plant.
Maintaining and the solving the faults during the shift reporting all my remarks to my mangers and contributing in predictive and preventive maintenance.
-switch gear room of the medium feeders 11KV
-transformers (low tension side) (11KV / 380 v)
-MCC room
-Generators station.
-DCS handling and configuring (YoKogawa centum 3000)

All production control instruments and PLCs
-Boilers
-Compressors
-water treatment station
-milk of lime station
-chillers
-sewage water treatment station
- Sugar dissolving plant.




7/2001 - 12/2001
The international company for engineering works.
6th of October city.
Electrical and automation panels design engineer.
Designing and Installation of control panels by using Schneider PLC
Designing and installation of medium and low voltage panels

Knowledge Background

YOKOGAWA DCS (CS 3000 R3.1 to R3.8)
. Basics
. Installation and startup
. Engineering
. Maintenance
YOKOGAWA SAFETY PLC PROSAFE RS
. Programming
. Installation

Training
Process Measurements Technology and Instrumentation, GIZA SYSTEMS, EGYPT. -Process
Control Applications, Advanced Process Control, GIZA SYSTEMS, EGYPT. -Advanced DCS System (Yokogawa CS3000), GIZA SYSTEMS, EGYPT. -PLC (Programmable Logic Control) Schneider premium PLC EGYPT.
Yokogawa Safety prosafe PLC, Giza systems, Egypt
Yokogawa safety prosafe RS, Giza systems, Egypt
Dragger Gas detection systems, Giza systems, Egypt
Presentation skills training course , Giza systems, Egypt


Education Background
Bachelor’s degree in Electrical and Control Engineering2001Cairo University Cairo. Egypt. .

windows XP professional
network skills
visual basic
auto cad
Microsoft office

communication skills
presentation skills