CV Valid IWCF Junior Driller, Derrickman, Roughneck, Cracow Drilling, Great Wall Drilling Company

Resume built for oil and gas job opportunities by a jobseeker with experience in Valid IWCF Junior Driller, Derrickman, Roughneck, Cracow Drilling, Great Wall Drilling Company - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 99166

Mission Tasks
1) Carry out drilling operations ensuring the respect of the planning and of the safety rules

Professional Skills
2) Receive instructions for drilling parameters (weight on bit, rotary table rpm, pressures and pump outputs) as well as other work procedures (type and expected life of bit, mud characteristics, bore control etc.), and ensure their correct application. Whenever deemed necessary, within the specified limits, change the drilling parameters to improve the drilling progress; 2) Receive handover for the previous shift and verify the status of operations and equipment before beginning his shift; 3) Check and set up the equipment necessary for the assigned shift, i.e. drill pipes and other tubular material, x-over, etc; 4) Operate the drawwork during drilling activities and complex manoeuvres; 5) Assist rig down/rig up operations by coordinating and controlling; 6) Ensure that all reporting routines are followed and that all equipment related paperwork are carried out within his area of responsibility. Specifically he/she must: 6.1) fill up a daily drilling report for the activites performed during his/her shift describing the work carried out and the equipment utilized; 6.2) Update the pipe tally book and draft dimensioned drawings of the equipment run in the well; 7) Ensure that all orders and instructions received verbally or in writing are fully understood and adhered to; 8) Be safety conscious in all his/her work and use compulsory protective equipment; 9) Responsible for safe working conditions on the drill floor at all times; 10) Ensure that his subordinates use compulsory protective equipment; 11) Be familiar with all relevant work and safety procedures issued by Saipem and Operator; 12) Apply and ensure the correct application of prescribed safety standards and regulations, and take part in emergency drills and safety meetings; 13) Issue Safe Job Analysis before start-up of non routine operation or job and ensure completion of risk assessments where required; 14) Instruct all personnel assigned to him for assistance of their duties and responsabilities and of any special safety precaution to be taken prior to start up of any work; 15) Carry out BOP and pit level drill etc. in accordance with regulations laid down by Government Authorities or Operating Company; 16) Promptly report all accidents, near-miss accidents and non-conformance through the proper channels; 17) Intervene promptly and opportunely in emergencies, at the same time notifying the superior in charge; 18) Ensure that good housekeeping is maintained on the drill floor;

1.Working with GREAT WALL DRILLING COMPANY as a TRAINEE ASSIST. DRILLER from 03rd May 2009 to onwards…

JOB PROFILE:drilling rigs F200, F320 and I achieved and conducted rig up, rig down, move rig operations, drill initialization, drill operation, RIH casing, cementing casing, rig up BOP, test BOP, conditioning mud according to the geological-technical indications, drilling in accord with the geological-technical indications, coring indicated interval, operation with TESTER, participation at geophysical operations effectuated during drill the hole, repair and keep a good solution of technical accidents and drilling complications when :leak and breaks the drill string ,fluid lose, extracting metal parts left at the bottom hole, catching in the drilling hole, kill well


2.Worked with CRACOW DRILLING as a DERRICKMAN from 22nd August 2007 to 28th February 2009

JOB PROFILE:Worked As a Derrick Man. Responsible carrying out all of the Monkey board jobs
doing all jobs required on the mast high up level rig floor. Also Sharing in installing the BOP.
and maintenance on all the tools. BOP, Mud Pumps, assist Mechanic


Worked with CRACOW DRILLING as a FLOORMAN from 13th December 2005 to 21st August 2007.

JOB PROFILE:Worked As a Floor man Responsible normal Operations.

*BACHELOR OF BUSINESS ADMINISTRATION IN INFORMATION TECHNOLOGY MANAGEMENT (BBA-ITM) FROM HAMDARD UNIVERSITY I ISLAMABAD PAKISTAN IN THE YEAR 2005.
SPECIALIZATION; FINANCE ACCOUNTING, SALES & MARKETING, M ANAGEMENT AND IT

*2nd INTERMEDIATE IN PRE MEDICAL FROM RAWALPINDI BOARD OF I NT INTERMEDIATE (PAKISTAN)

*3rd HIGHER SECONDARY SCHOOL CERTIFCATE IN SCIENCE SUBJECTS FROM RAWALPINDI BOARD OF SECONDARY & HIGHER SECONDARY E EDU CATION EDUCATION (PAKISTAN)

*Valid IWCF Certification.

SAFETY TRAINING COURSES:

1.H2S Training
2.First Aid Training
3.Fire Fighting
4.Manual Handling Awareness Course
5.Hand safety Awareness Course
6.Safe Rigging & Slinging Course
7.Permit to work Course

COMPUTER KNOWLWDGE:
*COMPLETED COMPUTER CERTIFCATE IN MICROSOFT OFFICE SUCH AS; FUNDAMENTAL OF COMPUTER. MS WORD, EXCEL, POWER POINT, E -MAIL AND INTERNET.

*IELTS: INTERNATIONAL ENGLISH LANGUAGE TRAINING EXAMINATION WITH 6.5 BANDS.

*COMPUTER SOFTWARE:Certification in Peachtree Accounting Software,QuickBook Software.

Ability to taking quick and sound decisions, to stay calm in case of trouble-shooting (or under emergency) drilling or other operational problems. I have a lot of hands-on experience in drilling industry, I understand the work and workers, and I have the ability to communicate with rig workers and management.
Ability to identify the symptoms and characteristics of operational dificulties.In depth understanding of BHA's hole problems and solutions.
Experience in fields with wells greater than 16500 ft depth.
Drilling-Deviated
Prior experience with high pressure gas wells.
Cementing, Walkovers, Completion.
Rotary driven Kelly’s systems and Top Drive Systems.
Technical knowledge of the performance of different tools available.
Provide continual and accurate information