CV Senior QA/QC Engineer UHDE GmbH ThyssenKrupp Toyota Tsushu Corporation TPSC/TTC Alexandria Egypt

Resume built for oil and gas job opportunities by a jobseeker with experience in Senior QA/QC Engineer UHDE GmbH ThyssenKrupp Toyota Tsushu Corporation TPSC/TTC Alexandria Egypt - would you like to offer this candidate a job/contract employment?

CV/Resume ID no.: 99378

Dear Sir,

I am seeking an opportunity to direct my experience through a position as a “Senior QA/QC Engineer”.
I hope you’ll agree that my technical and interpersonal skills would make me a valuable asset within your firm. As detailed in my C.V. I have gained a broad range of skills through my experience as an Engineer with international companies for about 13 years in oil/gas projects.
I would appreciate an opportunity to discuss my background with you, and how I may adapt my skills to meet your needs. Please feel free to contact me if I can provide any additional information that would be of help to you.

1.From November 2008- Till Now:
Employer : Toshiba plant systems & Services Corporation in consortium with
Toyota Tsushu Corporation (TPSC/TTC).
Project : Sidi Krir power station- 750 MW combined cycle project, Alexandria,
Egypt.
Contractor : Mega for construction & industries Co.
Title : Lead QA/QC Mechanical Engineer as an EPC contractor.
Duties : 1- Preparing and review all QC procedures, QC forms as per codes and contract
Specifications.
2- Lead the QC team in the piping and mechanical equipment inspection.
3- Distribute the work load of QC team and follow up the inspectors’ performance.
4- Check the weekly reports of QC team activities.
5- Inspection of all above ground power piping as per ASME B31.1
6- Review of WPS for all materials as per “ASME IX” and contract specifications.
7- Witness of procedure qualifications (PQR) welding and testing.
8- Witness of welders’ qualification test (WQT).
9- RT films interpretation.
10- Review of test packages for all piping systems.
11- Review of contractor NDT reports.


2.From May 2007 – October 2008:
Employer : Al-Khafji Joint Operations KJO (Aramco Gulf operation and Kuwait
Gulf Oil Company) Through Velosi Certification Co. W.L.L Oil &Gas
(Kuwait Office).
Project : Khafji FDP Phase -1 (Offshore), Maadia (Beheira), Egypt.
Contractor : Enppi, Petrojet.
Title : Senior QA/QC Engineer (OOK-Egypt) As an Owner.
Duties : Inspection of 6 platforms (Deck, Jacket and its related piping as per Aramco
And KJO Standards, AWS D 1.1& API RP. 2A and ASME B31.3) including
Fit-up inspection, visual inspection, RT films interpretation, review NDT reports, preparing and follow up the final punch list and review the final documentation.


3.From June 2006 – April 2007:
Employer : National Gas Company (NATGAS).
Project : 8" Nubaria Sugar Gas Pipeline, Nubaria, Egypt.
Owner : Nubaria Sugar and Refining Company (N.S.R.C).
Third Party : Bureau Veritas (BV).
Title : QA/QC Manager (As an Owner).
Duties : Inspection for Onshore Pipeline as per API 1104, ASME B31.8 including material
Inspection, welders’ Qualifications, construction activities, testing – pre-commissioning and
Commissioning included (Cleaning, Gauging, Hydro Static testing, drying and Nitrogen
Purging) and distribute the work load and activities of QC inspectors during all stages.


4. From March 2005 – April 2006:
Employer : UHDE GmbH (ThyssenKrupp) as per the following projects:
a) Project : Ammonia/Urea Helwan Fertilizers Project, Helwan, Egypt.
Owner : Helwan Fertilizers Company (HFC).
Title : Senior QA/QC Engineer (As an EPC Contractor).
Duties : Inspection for Process Piping as per DIN, EN codes, And UHDE specifications.
b) Project : Ammonia/Urea Suez II Fertilizers Project, Ain El Sokhna, Suez, Egypt.
Owner : Egyptian Fertilizers Company (EFC).
Title : Senior Tank Engineer (As an EPC Contractor).
Duties : Inspection for storage tanks according to “DIN 4119”.


5. From June 2004 – February 2005 :
Employer : Germanischer Lloyd Oil and Gas (GLO) as per the following projects:
a) Project : LAB project, Mesaieed, State of Qatar.
Owner : Qatar Petroleum (QP).
Title : Senior QA/QC Engineer (As a third Party).
Duties : Inspection (dimension and welding) of storage tanks as per “API 650”, and process
Piping as per “ASME B 31.3”.
b) Project : Simian project, Burullus, Alexandria, Egypt.
Owner : Burullus Gas Company.
Title : Senior QA/QC Engineer (as an Owner Rep.).
Duties : Offshore inspection (4” Pipe lines normal laying) as per “DNV Rules”.


6. From April 2003 – MAY 2004:
Employer : Technip Italy S.P.A. (Technip) as per the following projects:
a) Project : Unleaded Gasoline, Low Sulphur Gas Oil Project (El-Ruwais,
Abu Dhabi, U.A.E.).
Owner : Abu Dhabi Oil Refining Company (TAKREER), ADNOC.
Third Party : Parsons, Moody International Company (PMC).
Title : Senior QA/QC Engineer (as an EPC Contractor).
Duties: 1. Follow up the inspection works and N.D.T., and checking documents for all contractors.
2. Witness of Welders’ Qualification tests (W.Q.T.).
3. Reviewing W.P.S., P.Q.R. According to “ASME IX” and client specifications.
4. RT Films interpretation.
5. Process piping inspection according to “ASME B31.3”, and client specifications.
6. Storage tanks inspection according to “API 650”, and client specifications.
7. Review test packages concerning welding summary, and N.D.T.
b) Project : Thiopaq Acid gas treatment unit (El-Mex, Alexandria, Egypt).
Owner : Alexandria Mineral Oils Company (AMOC).
Title : Senior QA/QC Engineer (as an EPC Contractor).
Duties: 1. Follow up the inspection works and N.D.T., and checking documents for all contractors.
2. Witness of Welders’ Qualification tests (W.Q.T.).
3. RT Films interpretation.
4. Process piping inspection according to “ASME B31.3”.
5. Storage tanks inspection according to “API 650”.
6. Prepare, and reviewing test packages concerning welding summary, and N.D.T.


7. From MAY 2002 - February 2003:
Employer : EDF Egyptian Engineering Company (3ec).
Project : EDF Suez Gulf Power Plant, 2 X 341 MW, Ain El-Sokhna, Suez, Egypt.
Title : Senior QA/QC Engineer (as an Owner consultant).
Duties:
1. Follow up the inspection works and N.D.T., and checking documents for all contractors.
2. Reviewing test packages concerning welding summary, and N.D.T.
3. Reviewing W.P.S., P.Q.R. According to “ASME IX”.
4. Witness of Welders’ Qualification tests (W.Q.T.).
5. RT Films interpretation.
6. Power piping inspection according to “ASME B31.1”.
7. Storage tanks inspection according to “API 650”.
8. Responsible for coordination of end of erection reports review.


8. From August 2001 – April 2002:
Employer : ABB Petroleum Technology S.A.E. (Main Contractor).
Client : Alexandria Company For Petroleum Additives (ACPA).
Project : Additives Blending Plant (El-Mex, Alexandria, Egypt).
Title : QA/QC Engineer (As an EPC Contractor).
Duties : Responsible for all inspection works in Process piping, and storage tanks
According to “ASME B31.3 & API 650”.


9. From September 2000 – August 2001:
Employer : HITACHI PLANT ENGINEERING & CONSTRUCTION CO.
Location : ANSDK Site Office, Fabrication Workshop (EL-Dekheila, Alexandria, Egypt).
Project : Fabricated items for cement projects (Blue Circle project, Qena cement
Project, and Sinai white and Sinai Gray projects).
Title : Quality Control Engineer (As a Sub Contractor).
Duties : Responsible for all inspection works in fabrication workshop for fabricated Items (Piping,
Steel structure, Equipment, Tanks) according to client specifications (F.L. SMIDTH CO.)
As per the following items:
1. Dimension check, and visual inspection (VT).
2. Fit up inspection, witness for all N.D.T. inspection, and preparing all reports.


10. From February 2000 – August 2000:
Employer : Foster Wheeler France (FWF).
Client : Alexandria Mineral Oils Company (AMOC).
Consultant : Technip Italy s.p.a.
Site : Lube oil expansion project (El-Mex, Alex., Egypt).
Title : Quality Control Engineer (As an EPC Contractor).
Duties : Responsible for all inspection work of all contractors according to “API 650”,
“ASME B31.3” and “Foster Wheeler Specifications” as per the following items:
1. Visual inspection (VT).
2. RT Films Interpretation.
3. Follow up the inspection work and N.D.T., checking documents for all contractors.
4. Witness of Welders’ Qualification Test (W.Q.T.) and (P.Q.R.).
5. Checking all documents, test packages of tanks, and piping.
6. Witness of pressure test for tanks, and piping.
7. Checking punch list, and hand over to the client.


11. From November 1998 – January 2000 :
Employer : Toyo Engineering Corporation (TEC).
Client : Sidi Krir Petrochemicals Company (SIDPEC), Amriya, Alexandria, Egypt.
Project : SIDPEC Ethylene Plant (300,000 MT/Y).
Title : Quality Control Engineer (As an EPC Contractor).
Duties : Responsible for all inspection works in Spherical Tanks (Ethylene and Ethane storage
Spherical tanks) according to “ASME VIII”, and storage tanks according to “API 650”, and
Process piping according to “ASME B31.3” as per the following items:
1. Monitoring of welders performance, electrodes, and preheating.
2. Witness of Welders’ Qualification test (W.Q.T.).
3. Radiographic Films interpretation.
4. Follow up the inspection work and N.D.T., checking documents for all Contractors.
5. Checking heat-treatment charts of spherical Tanks, and piping.
6. Witness of pressure test for spheres, storage tanks, and piping.


12. From May 1997 – July 1998:
Employer : PETROJET (The Petroleum Projects and Technical Consultation Co.).
Client : Alexandria Petroleum Company (EL-MEX, Alexandria, Egypt).
Title : Quality Control Engineer (As a Contractor).
Duties : Responsible for Inspection the new projects of storage tanks, and process piping
According to “API 650”, “ASME B31.3” and “Client specifications”.

Degree : B.Sc. Mechanical Power Engineering.
University : Alexandria.
Date of graduation : June 1996
Certified Welding Inspector: CSWIP 3.1, According to TWI instructions
(CSWIP CERTIFICATE ).
Level II (N.D.T. Methods) : RT, UT, MT, PT (According to ASNT instructions).
Personal survival and search and rescue course “The Arab academy for science and technology and maritime transport”, cert. (Expired on May, 2009)
ISO 9001:2008 (Quality Management System), Certified Auditor -Lead Auditor certificate.
Training Courses: 1) Design of High pressure Pipeline (by Advantica Co.).
2) Cathodic protection and corrosion control (by Advantica Co.).

 WINDOWS XP, Vista, Internet.
 Microsoft Word & EXCEL 2007.
 MS- Project Professional 2003 Level 1, 2.

N/A